Bob Kennedy > 1986 Ford Bronco > open folder Axle stuff

Dana 60, complements of a 79 F250.
Hits: 3002
Size: 78.95 KB
Posted: 2/27/04
Dana 60, complements of a 79 F250.		Painted, re-geared to 5.38s and a Detroit for good measure. Bolted under the Bronco.
Hits: 3109
Size: 85.28 KB
Posted: 2/27/04
Painted, re-geared to 5.38s and a Detroit for good measure. Bolted under the Bronco.		Dana 44HD, complements od another 79 F250. It's on the stand, getting 5.38s and a drop in Detroit.
Hits: 1667
Size: 94.08 KB
Posted: 2/27/04
Dana 44HD, complements od another 79 F250. It's on the stand, getting 5.38s and a drop in Detroit. 		Here's the Dana 44HD cleaned up, w/5.38 gears, a drop-in Detroit and a fresh coat of paint. That's R...
Hits: 1410
Size: 76.12 KB
Posted: 3/11/04
Here's the Dana 44HD cleaned up, w/5.38 gears, a drop-in Detroit and a fresh coat of paint. That's R...		Knuckles with the high steer arms installed.
Hits: 1580
Size: 98.31 KB
Posted: 6/14/04
Knuckles with the high steer arms installed.
It's geeting closer. Got the axle joints swapped and the new ball joints...
Hits: 1425
Size: 83.48 KB
Posted: 6/21/04
It's geeting closer. Got the axle joints swapped and the new ball joints...		All the TTB bracketry will be gone tomorrow!
Hits: 1650
Size: 83.32 KB
Posted: 6/21/04
All the TTB bracketry will be gone tomorrow!		Take a look at those calipers. I can not wait to get this rig back on the trail. Broncofest is this ...
Hits: 1639
Size: 80.54 KB
Posted: 6/21/04
Take a look at those calipers. I can not wait to get this rig back on the trail. Broncofest is this ...		It's under there. Let teh fabrication work begin.
Hits: 1663
Size: 84.64 KB
Posted: 6/23/04
It's under there. Let teh fabrication work begin.		Bailed on coils. Got a sweet deal on some F350 Superlift leaf springs. I already like the looks of ...
Hits: 1068
Size: 107.01 KB
Posted: 9/7/08
Bailed on coils. Got a sweet deal on some F350 Superlift leaf springs. I already like the looks of ...
The rear shackle will prove to be interesting on the passenger side. May need to move the catalytic ...
Hits: 976
Size: 93.97 KB
Posted: 9/7/08
The rear shackle will prove to be interesting on the passenger side. May need to move the catalytic ...		Got a couple of sticks of 2X4 3/16" thick. Cut one just long enough to fit between the framerails. N...
Hits: 913
Size: 88.57 KB
Posted: 11/19/08
Got a couple of sticks of 2X4 3/16" thick. Cut one just long enough to fit between the framerails. N...		Notched the passenger side to get that side in there.
Hits: 927
Size: 84.07 KB
Posted: 11/19/08
Notched the passenger side to get that side in there.		Here's the spring packs setting against the square tube. Looks pretty good so far.
Hits: 931
Size: 95.09 KB
Posted: 11/19/08
Here's the spring packs setting against the square tube. Looks pretty good so far.		The same view from the passenger side. Now I'll get to work on the spring hangers.
Hits: 1087
Size: 93.58 KB
Posted: 11/19/08
The same view from the passenger side. Now I'll get to work on the spring hangers.
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog