10'' JL Audio W1v2 4ohm subwoofer and JL Audio speaker grill

sub with grill cover on

wiring

Cobalt amp

amp with blackberry to show size

notice the size

planning and measuring

nice sawhorses

first idea that we decided to throw out

tray/bottom of box

sides of box

sides and tray

tray/sides/back

new location for the amp

tracing to a template

truck i installed a stereo in

hole for subwoofer

idea of what the box will look like

front pannel will be recessed 1.5'' to allow for the sub to clear

quick disconnect

original front piece of box that ended up getting scrapped today

cutting out the hole for the quick disconnect

hole cut

mock-up before i cut the tray piece

after the tray was cut

first 2 pieces together

sides and back together

front

mock up

top piece (still have to sand down)

sealing the box

sealing the outside too

sealing

quick disconnect installed

mock up of everthing

mock-up

more mock-up

mocked up in the car

from the inside of the cabin

sanded down the top and started sealing the screw holes

sanded the back piece flush and sealed

tray piece installed and finished sealing the inside

taped off the bottom, ready for final sanding and a quick couple of coats of spray paint

before final sanding

final sanding

first coat of paint

paint

bad picture of where i installed the remote bass knob

installed and wired, not completely done

L bracket used to secure enclosure

wiring, amp, and bracket

hi-to-lo converter

remote bass knob

picked up my fabric and materials to cover the box

during (don't mind the old t-shirt. it was just to prevent overspray from getting on the sub)

starting to cover it

after

after

Sketchup

Sketchup

Sketchup

Sketchup

Sketchup

Weatherstripping

Weatherstripping

poly-fil

start of the foam

test fit

foam laid down/start of vinyl

subwoofer back in place

closer...

closer...

done!

done!