breather line coming off the rearend.
Hits: 1154
Size: 81.19 KB
Posted: 12/21/03
breather line coming off the rearend.
where the line parallels the wire loom/fuel line on the left frame rail.
Hits: 1132
Size: 83.59 KB
Posted: 12/21/03
where the line parallels the wire loom/fuel line on the left frame rail.
where the transfer case t's into the line that runs fron to rear.
Hits: 1127
Size: 92.2 KB
Posted: 12/21/03
where the transfer case t's into the line that runs fron to rear.
where the front diff and rear line T and mate with the one line that goes under the hood.
Hits: 1005
Size: 84.98 KB
Posted: 12/21/03
where the front diff and rear line T and mate with the one line that goes under the hood.
fram fuel filter
Hits: 1139
Size: 104.63 KB
Posted: 12/21/03
fram fuel filter
snorkel
Hits: 1148
Size: 101.79 KB
Posted: 12/21/03
snorkel
pulled the tranny access panel to get the tranny breather on
Hits: 997
Size: 53.79 KB
Posted: 3/29/04
pulled the tranny access panel to get the tranny breather on
re-routed the breather lines so that the diffs are on 1 line and the tranny and t-case are on anothe...
Hits: 1044
Size: 62.62 KB
Posted: 3/29/04
re-routed the breather lines so that the diffs are on 1 line and the tranny and t-case are on anothe...
still using 1 filter with a T in the line right before the filter now. the tranny/tcase (which both ...
Hits: 1018
Size: 73.77 KB
Posted: 3/29/04
still using 1 filter with a T in the line right before the filter now. the tranny/tcase (which both ...
my previous method of a tranny breather had fallen off, so i needed to get a male adapter to fit ins...
Hits: 997
Size: 53.26 KB
Posted: 6/1/04
my previous method of a tranny breather had fallen off, so i needed to get a male adapter to fit ins...
i used some random silicone i had laying around, but it didn't hold. i ended up using krazy glue, wh...
Hits: 943
Size: 56.75 KB
Posted: 6/1/04
i used some random silicone i had laying around, but it didn't hold. i ended up using krazy glue, wh...
the angle of the hose was not allowing it to hold in, so i used a 90* bend to get it right.
Hits: 942
Size: 60.62 KB
Posted: 6/1/04
the angle of the hose was not allowing it to hold in, so i used a 90* bend to get it right.
its ghetto, but it survived the rubicon.
Hits: 988
Size: 56.94 KB
Posted: 6/1/04
its ghetto, but it survived the rubicon.
  

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog