image-2014-02-19-19-30-05.jpg 333 hits | 64.73 KB | Posted: 2/20/14 figure out the leanth of the chain and grind down the pins and remove the links then simply put it all back together and use the master link to put the chain back together
image-2014-02-19-19-30-11.jpg 324 hits | 70.52 KB | Posted: 2/20/14 put the axle back into place and setup your new chain
image-2014-02-19-19-29-59.jpg 335 hits | 73.29 KB | Posted: 2/20/14 take the old spocket off and put the new one on and make sure to use extra long bolts so you can put lock nuts on the other side and then reassemble
image-2014-02-19-19-29-50.jpg 334 hits | 73.28 KB | Posted: 2/20/14 then take the big nuts off and the piece that holds the sprocket on will slide off
image-2014-02-19-19-29-41.jpg 315 hits | 59.66 KB | Posted: 2/20/14 then with these tools tap the inner ring of the bearing and it will slide off
IMG_20140219_201627.jpg 321 hits | 66.58 KB | Posted: 2/20/14 when it comes out it looks like this, take off this nut
IMG_20140219_200845.jpg 314 hits | 80.54 KB | Posted: 2/20/14 and these, also take off the sprocket upper cover then pull the entire axle out
IMG_20140219_195303.jpg 608 hits | 75.68 KB | Posted: 2/20/14 First take all these bolts out
Most Viewed Files
IMG_20140219_195303.jpg 608 hits | 75.68 KB | Posted: 2/20/14 First take all these bolts out
image-2014-02-19-19-29-59.jpg 335 hits | 73.29 KB | Posted: 2/20/14 take the old spocket off and put the new one on and make sure to use extra long bolts so you can put lock nuts on the other side and then reassemble
image-2014-02-19-19-29-50.jpg 334 hits | 73.28 KB | Posted: 2/20/14 then take the big nuts off and the piece that holds the sprocket on will slide off
image-2014-02-19-19-30-05.jpg 333 hits | 64.73 KB | Posted: 2/20/14 figure out the leanth of the chain and grind down the pins and remove the links then simply put it all back together and use the master link to put the chain back together
image-2014-02-19-19-30-11.jpg 324 hits | 70.52 KB | Posted: 2/20/14 put the axle back into place and setup your new chain
IMG_20140219_201627.jpg 321 hits | 66.58 KB | Posted: 2/20/14 when it comes out it looks like this, take off this nut
image-2014-02-19-19-29-41.jpg 315 hits | 59.66 KB | Posted: 2/20/14 then with these tools tap the inner ring of the bearing and it will slide off
IMG_20140219_200845.jpg 314 hits | 80.54 KB | Posted: 2/20/14 and these, also take off the sprocket upper cover then pull the entire axle out
