Jeremy Millrood > 1992 Ford Bronco > open folder Sliders / Framerails

Heavy duty sliders built by Dave Edwards High Desert Off Road. These will be installed once I get a...
Hits: 1282
Size: 91.49 KB
Posted: 9/22/03
Heavy duty sliders built by Dave Edwards High Desert Off Road. These will be installed once I get a...		Sliders will be mounted with 16 1 1/2 inch grade 8 bolts with washers and locking washers.
Hits: 1316
Size: 84.5 KB
Posted: 9/22/03
Sliders will be mounted with 16 1 1/2 inch grade 8 bolts with washers and locking washers.		This is where the emergency brake cable runs along the drivers side frame rail. The slider will moun...
Hits: 1343
Size: 92.01 KB
Posted: 9/22/03
This is where the emergency brake cable runs along the drivers side frame rail. The slider will moun...		Towards the rear of the driver's side.
Hits: 1003
Size: 87.48 KB
Posted: 9/22/03
Towards the rear of the driver's side.		Passenger side frame rail towards the front, this side will be much easier to do than the the driver...
Hits: 1117
Size: 85.78 KB
Posted: 9/22/03
Passenger side frame rail towards the front, this side will be much easier to do than the the driver...
Passenger side rear.
Hits: 1090
Size: 77.31 KB
Posted: 9/22/03
Passenger side rear.		Front frender mount that needs to be trimmed all the way down in order to mount the slider flush wit...
Hits: 1169
Size: 55.95 KB
Posted: 10/6/03
Front frender mount that needs to be trimmed all the way down in order to mount the slider flush wit...		Remove bolt that mounts fender, then use a 4 inch grinder to remove the metal where the mount origin...
Hits: 1065
Size: 65.47 KB
Posted: 10/6/03
Remove bolt that mounts fender, then use a 4 inch grinder to remove the metal where the mount origin...		This is what the fender mount will look like once it has been trimmed down. The grinder made pretty ...
Hits: 1154
Size: 69.02 KB
Posted: 10/6/03
This is what the fender mount will look like once it has been trimmed down. The grinder made pretty ...		Once the mount was ground off we had to drill a hole further up to mount another bolt. Since you hav...
Hits: 1155
Size: 70.77 KB
Posted: 10/6/03
Once the mount was ground off we had to drill a hole further up to mount another bolt. Since you hav...
Passenger side slider mounted and held in place with one bolt. Undo the clips that hold the fuel ret...
Hits: 1070
Size: 91.46 KB
Posted: 10/6/03
Passenger side slider mounted and held in place with one bolt. Undo the clips that hold the fuel ret...		Here is the proof. Passenger side slider completely mounted and put to the test. Its holding the ful...
Hits: 1193
Size: 96.65 KB
Posted: 10/6/03
Here is the proof. Passenger side slider completely mounted and put to the test. Its holding the ful...		Once the fender mount has been relocated on the driver's side, you have to unbolt these two nuts tha...
Hits: 1108
Size: 48.7 KB
Posted: 10/7/03
Once the fender mount has been relocated on the driver's side, you have to unbolt these two nuts tha...		On the rear of the driver's side there are bolts through the frame for the fuel filter bracket. Remo...
Hits: 1003
Size: 46.89 KB
Posted: 10/7/03
On the rear of the driver's side there are bolts through the frame for the fuel filter bracket. Remo...		driver's side front pad mount. There is a fuel line bracket that runs behind this mount, bolts to th...
Hits: 1069
Size: 107.14 KB
Posted: 10/8/03
driver's side front pad mount. There is a fuel line bracket that runs behind this mount, bolts to th...
Rear driver's side pad mounting, there is about a 1/4 inch clearance between the ebrake cable and th...
Hits: 1112
Size: 93.41 KB
Posted: 10/8/03
Rear driver's side pad mounting, there is about a 1/4 inch clearance between the ebrake cable and th...		This is behind the rear pad mount on the driver's side. You must remove the bolts holding the fuel f...
Hits: 1218
Size: 92.27 KB
Posted: 10/8/03
This is behind the rear pad mount on the driver's side. You must remove the bolts holding the fuel f...		3M no slip tape.
Hits: 1199
Size: 81.59 KB
Posted: 10/14/03
3M no slip tape.		  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog