Heavy duty sliders built by Dave Edwards High Desert Off Road.  These will be installed once I get a...
Url
Tag
Img
Thumb
Sliders will be mounted with 16 1 1/2 inch grade 8 bolts with washers and locking washers.
Url
Tag
Img
Thumb
This is where the emergency brake cable runs along the drivers side frame rail. The slider will moun...
Url
Tag
Img
Thumb
Towards the rear of the driver's side.
Url
Tag
Img
Thumb
Passenger side frame rail towards the front, this side will be much easier to do than the the driver...
Url
Tag
Img
Thumb
Passenger side rear.
Url
Tag
Img
Thumb
Front frender mount that needs to be trimmed all the way down in order to mount the slider flush wit...
Url
Tag
Img
Thumb
Remove bolt that mounts fender, then use a 4 inch grinder to remove the metal where the mount origin...
Url
Tag
Img
Thumb
This is what the fender mount will look like once it has been trimmed down. The grinder made pretty ...
Url
Tag
Img
Thumb
Once the mount was ground off we had to drill a hole further up to mount another bolt. Since you hav...
Url
Tag
Img
Thumb
Passenger side slider mounted and held in place with one bolt. Undo the clips that hold the fuel ret...
Url
Tag
Img
Thumb
Here is the proof. Passenger side slider completely mounted and put to the test. Its holding the ful...
Url
Tag
Img
Thumb
Once the fender mount has been relocated on the driver's side, you have to unbolt these two nuts tha...
Url
Tag
Img
Thumb
On the rear of the driver's side there are bolts through the frame for the fuel filter bracket. Remo...
Url
Tag
Img
Thumb
driver's side front pad mount. There is a fuel line bracket that runs behind this mount, bolts to th...
Url
Tag
Img
Thumb
Rear driver's side pad mounting, there is about a 1/4 inch clearance between the ebrake cable and th...
Url
Tag
Img
Thumb
This is behind the rear pad mount on the driver's side. You must remove the bolts holding the fuel f...
Url
Tag
Img
Thumb
3M no slip tape.
Url
Tag
Img
Thumb
  

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog