|
|
Hits: 2001
Size: 95.33 KB
Posted: 1/21/04
Taking the c-clips out was a little difficult, I was able to get this one out with a pick, but the o... | 
Hits: 1960
Size: 101.8 KB
Posted: 1/21/04
Using the balljoint press to push the caps out, these were in pretty tight so it took a little effor... | 
Hits: 1753
Size: 91.36 KB
Posted: 1/21/04
This is what it will look like once the cap has been pushed out. | 
Hits: 1742
Size: 98.41 KB
Posted: 1/22/04
Make sure you push the opposite side of the u-joint out after you get one of the caps off. | 
Hits: 1694
Size: 91.26 KB
Posted: 1/22/04
|
Hits: 1703
Size: 97.66 KB
Posted: 1/22/04
| 
Hits: 1684
Size: 98.06 KB
Posted: 1/22/04
Here are the caps after they had all been pushed off. One of the caps actually popped. | 
Hits: 1604
Size: 76.48 KB
Posted: 1/22/04
All of the caps have been pushed off. Now I can't get the u-joint out of the inner axle shaft. I tri... | 
Hits: 1636
Size: 73.37 KB
Posted: 1/26/04
Took a 5 pound sledge hammer, placed the base of the ears on a block of wood, and hit the u-joint. | 
Hits: 1617
Size: 89.93 KB
Posted: 1/26/04
It came right out after 2 hits. |
Hits: 1655
Size: 75.1 KB
Posted: 4/13/04
These are the u-joints I used for the front axles, Brute Force, part # 10297BF. | 
Hits: 1643
Size: 75.78 KB
Posted: 4/13/04
This is the u-joint, the end caps pull right off. Be careful with them, as you don't want to mess up... | 
Hits: 1673
Size: 54.14 KB
Posted: 4/13/04
After removing the caps, I positioned the u-joint betweent the two axle pieces. You may have to work... | 
Hits: 1657
Size: 61.84 KB
Posted: 4/13/04
Here is another angle of the u-joint seated. The caps have not been installed yet. | 
Hits: 1659
Size: 82.24 KB
Posted: 4/13/04
Here I am about to push one of the caps on, they actually slid on pretty easily. Make sure you do th... |
Hits: 1785
Size: 87.43 KB
Posted: 4/13/04
Pressing the cap on with a balljoint press, this is a great tool. I highly recommend spending the $1... | 
Hits: 1842
Size: 76.41 KB
Posted: 4/13/04
Here is the axle completely assembled with the new u-joint installed. Now the tricky part is install... | | | |
U-joint replacement