Found a cross threaded wheel stud on my 8.8. Not sure if I did this, or if it was the shop that put the tires on. anyway, this is an easy repair.

Tools/parts needed
1 - Dorman AutoGrade - Wheel Stud -Part # 610-260 ($1.99)
5 lb sledge hammer
Impact gun or large breaker bar
4 or 5 thick washers
grease

5 lb sledge made quick work of the old stud, plenty of clearance behind the end of the axle shaft.

and it's out..you can see how chewed up the threads are..

used a bit of grease around the knurled part of the stud to help it go in easier.

used a stack of some thick washers so I could pull the stud into the shaft.

hitting it with my impact gun.

this is my cheap HF impact, but it got the job done, was able to draw the stud flush with the back of the shaft.

Finished product.