Jeremy Millrood > 1992 Ford Bronco > open folder Ford 8.8 wheel stud replacement

Found a cross threaded wheel stud on my 8.8. Not sure if I did this, or if it was the shop that put ...
Hits: 227
Size: 63.86 KB
Posted: 2/3/15
Found a cross threaded wheel stud on my 8.8. Not sure if I did this, or if it was the shop that put ...		5 lb sledge made quick work of the old stud, plenty of clearance behind the end of the axle shaft.
Hits: 275
Size: 47.65 KB
Posted: 2/3/15
5 lb sledge made quick work of the old stud, plenty of clearance behind the end of the axle shaft.
Hits: 290
Size: 57.9 KB
Posted: 2/3/15

Hits: 230
Size: 59.43 KB
Posted: 2/3/15
and it's out..you can see how chewed up the threads are..
Hits: 226
Size: 35.16 KB
Posted: 2/3/15
and it's out..you can see how chewed up the threads are..
used a bit of grease around the knurled part of the stud to help it go in easier.
Hits: 286
Size: 65.67 KB
Posted: 2/3/15
used a bit of grease around the knurled part of the stud to help it go in easier.		used a stack of some thick washers so I could pull the stud into the shaft.
Hits: 303
Size: 55.04 KB
Posted: 2/3/15
used a stack of some thick washers so I could pull the stud into the shaft.		hitting it with my impact gun.
Hits: 298
Size: 47.76 KB
Posted: 2/3/15
hitting it with my impact gun.		this is my cheap HF impact, but it got the job done, was able to draw the stud flush with the back o...
Hits: 346
Size: 60.63 KB
Posted: 2/3/15
this is my cheap HF impact, but it got the job done, was able to draw the stud flush with the back o...		Finished product.
Hits: 294
Size: 60.3 KB
Posted: 2/3/15
Finished product.

Hits: 339
Size: 52.29 KB
Posted: 2/3/15
    
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog