1992 Ford Bronco Dana 44 lock out swap pictures, videos, and sounds


Hits: 179 Size: 40.88 KB Posted: 11/28/16 Replacing the milemarker lockouts with Warns on my solid axle Dana44, but this process should be exa...	Hits: 145 Size: 62.24 KB Posted: 11/28/16 Here are the shiny new Warns. They come with all the hardware you need to swap.	Hits: 173 Size: 53.7 KB Posted: 11/28/16 Old milemarker hub, they use a hex head bit on the retaining screws.	Hits: 149 Size: 53.34 KB Posted: 11/28/16 6 total and the lockout cover should come right off.	Hits: 158 Size: 51.25 KB Posted: 11/28/16
Hits: 138 Size: 53.04 KB Posted: 11/28/16 next step is to fish out the retaining ring. this holds the lockout body in place inside the hud. It...	Hits: 161 Size: 46.84 KB Posted: 11/28/16	Hits: 178 Size: 43.8 KB Posted: 11/28/16 and there's the ring.	Hits: 161 Size: 53.1 KB Posted: 11/28/16 now use a couple of your bolts to pull the lockout body free from the hub..it should slide right out...	Hits: 164 Size: 46.48 KB Posted: 11/28/16
Hits: 199 Size: 50.31 KB Posted: 11/28/16 with the old lockout removed the new one is ready to go in..the Warns come pre-greased, you don't wa...	Hits: 182 Size: 51.19 KB Posted: 11/28/16 new lockout body slides right into place. on the TTB axles you will need to add the snap ring (comes...	Hits: 152 Size: 57.72 KB Posted: 11/28/16 new lockout body fully seated and don't forget the retaining ring.	Hits: 190 Size: 54.45 KB Posted: 11/28/16 ready to button it up..once you put the bolts in for the cover, check the dial on the lockout to mak...