Jeremy Millrood > 1992 Ford Bronco > open folder Dana 44 lock out swap

Replacing the milemarker lockouts with Warns on my solid axle Dana44, but this process should be exa...
Url
Tag
Img
Thumb
Here are the shiny new Warns. They come with all the hardware you need to swap.
Url
Tag
Img
Thumb
Old milemarker hub, they use a hex head bit on the retaining screws.
Url
Tag
Img
Thumb
6 total and the lockout cover should come right off.
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
next step is to fish out the retaining ring. this holds the lockout body in place inside the hud. It...
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
and there's the ring.
Url
Tag
Img
Thumb
now use a couple of your bolts to pull the lockout body free from the hub..it should slide right out...
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
with the old lockout removed the new one is ready to go in..the Warns come pre-greased, you don't wa...
Url
Tag
Img
Thumb
new lockout body slides right into place. on the TTB axles you will need to add the snap ring (comes...
Url
Tag
Img
Thumb
new lockout body fully seated and don't forget the retaining ring.
Url
Tag
Img
Thumb
ready to button it up..once you put the bolts in for the cover, check the dial on the lockout to mak...
Url
Tag
Img
Thumb
 
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog