|
Driver's side
Cut out all the rust, This is not much bigger than the hole was.
|
|
Passenger side rust removal.
|
|
A paper pattern and the steel I used
|
|
Another piece before I welded it in place. I think I did pretty well working the metal.
|
|
Passenger side almost done. Notice the nut I welded on top so that I could hook the ground for the welder.
|
|
Drivers side after patches welded in and covered with fiberglass and resin.
|
|
Passenger side after welded patched are covered with fiberglass and resin.
|