1995 Ford Bronco GasTank Skid pictures, videos, and sounds


Hits: 2193 Size: 45.79 KB Posted: 7/27/03 Started with a rectangular sheet of 3/16" diamond plate that weighed apx. 50 lbs! Cut it down to th...	Hits: 2102 Size: 65.62 KB Posted: 7/27/03 steel bending using the ol BFH.	Hits: 2124 Size: 58.54 KB Posted: 7/27/03 Mounted up over the stock skid, which is still on. The rear lip is a bit unever, so the last pic sh...	Hits: 1785 Size: 59.75 KB Posted: 7/27/03 Attached up top at the stock bolt locations	Hits: 2186 Size: 63.37 KB Posted: 7/27/03 The diamond plate is on the inner side, so it's smooth on the outside. Diamondplate also makes the ...
Hits: 1913 Size: 61.49 KB Posted: 7/27/03	Hits: 1933 Size: 58.97 KB Posted: 7/27/03 Diagram of the H cut needed	Hits: 1744 Size: 57.01 KB Posted: 7/27/03 Diagram from the side of the bending needed to attach it.	Hits: 1778 Size: 45.97 KB Posted: 4/17/04 Recent photo, took the plate back off and drilled a few 1 1/2" drain holes, and ground down the rear...