Mark Zoelch > 1995 Ford Bronco > open folder GasTank Skid

Started with a rectangular sheet of 3/16" diamond plate that weighed apx. 50 lbs! Cut it down to th...
Url
Tag
Img
Thumb
steel bending using the ol BFH.
Url
Tag
Img
Thumb
Mounted up over the stock skid, which is still on. The rear lip is a bit unever, so the last pic sh...
Url
Tag
Img
Thumb
Attached up top at the stock bolt locations
Url
Tag
Img
Thumb
The diamond plate is on the inner side, so it's smooth on the outside. Diamondplate also makes the ...
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Diagram of the H cut needed
Url
Tag
Img
Thumb
Diagram from the side of the bending needed to attach it.
Url
Tag
Img
Thumb
Recent photo, took the plate back off and drilled a few 1 1/2" drain holes, and ground down the rear...
Url
Tag
Img
Thumb
 
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog