1995 Ford Bronco ShocksnMounts pictures, videos, and sounds


Hits: 1610 Size: 61.01 KB Posted: 8/16/03 Before...	Hits: 1606 Size: 65.73 KB Posted: 8/16/03	Hits: 1769 Size: 55.71 KB Posted: 8/16/03 The Plan....	Hits: 1723 Size: 51.6 KB Posted: 8/16/03 After....	Hits: 1688 Size: 63.09 KB Posted: 8/16/03
Hits: 1701 Size: 57.09 KB Posted: 8/16/03 Upper rear shock mount. took stock mount, cut rivets and bolted it up higher, after a little cuttin...	Hits: 1670 Size: 61.24 KB Posted: 8/16/03 another shot of the former mount.	Hits: 1530 Size: 39.57 KB Posted: 11/27/03 New upper rear shock mount. two plates are used. This pic is of the plate attached to the outside ...	Hits: 1560 Size: 57.29 KB Posted: 11/27/03	Hits: 1620 Size: 60.12 KB Posted: 11/27/03 Inside plate comes together with outside plate above the frame, where a hole was drilled for the sho...
Hits: 1548 Size: 65.48 KB Posted: 11/27/03	Hits: 1436 Size: 58.33 KB Posted: 11/27/03 small local steel shop that had bending equipment cut the 5" wide strips and made the bends after ho...	Hits: 1635 Size: 56.42 KB Posted: 11/27/03 Each plate is 5" wide, 3/16" plate steel. That might seem thin, but remember that they come togethe...	Hits: 1449 Size: 53.4 KB Posted: 11/27/03	Hits: 1683 Size: 65.58 KB Posted: 8/16/03 this shows how I now have an eyelet mounting up front instead of the stud mounting.
Hits: 1584 Size: 58.21 KB Posted: 8/16/03 Front shock...had to flip it due to knuckle under project and clearance between the rancho firmness ...