1995 Ford Bronco 8.8 Truss & Weld pictures, videos, and sounds


Hits: 2245 Size: 56.25 KB Posted: 4/9/04 A look at the whole truss	Hits: 1985 Size: 58.12 KB Posted: 4/9/04 Clearance is 7-8" up to body from the highest point, should even allow jumping if I ever desired to ...	Hits: 2169 Size: 53.84 KB Posted: 4/9/04 I like 8.8's, but they seem prone to tube to diff loosensing and then bending or spinning at this jo...	Hits: 2044 Size: 59.56 KB Posted: 4/9/04 Some may wonder why the truss loop over the diff is so high up...this allows the tube coming forward...	Hits: 1922 Size: 40.06 KB Posted: 4/9/04 Should be ok with exhaust, a little trail testing will tell.
Hits: 1956 Size: 54.75 KB Posted: 4/9/04 nudder shot of the 1.5" brace coming forward to tie in near pinion.	Hits: 1864 Size: 58.2 KB Posted: 4/9/04	Hits: 2007 Size: 50.93 KB Posted: 4/9/04 General idea with this truss is support right at the tube press fit to diff, with strong tie in supp...	Hits: 1998 Size: 47.99 KB Posted: 4/9/04 closeup of the 1/2 weld around the axle tube press fit in the diff.