Mark Zoelch > 1995 Ford Bronco > open folder Winch Mount

Warn 9k winch, 55 lbs. Solenoid, fairlead and wiring, 20lbs. add the mount and total weight apx. 10...
Url
Tag
Img
Thumb
mount is made of 8" Structural C channel, 11.5# with 2" sides, bottom is equivalent to 1/4" steel, b...
Url
Tag
Img
Thumb
before cutting this 38" piece is 33lbs. after it was 26.
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
test fit after cutting.
Url
Tag
Img
Thumb
The rear 2" side was cut down to about 1.25". Just enough room to clear tranny lines
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
This mount does not stick out way forward of the bumper/frame.
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Same pic, fairlead added
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Care on the winch mount is needed, as the fairlead bolt does need about 1" of clearance or it will t...
Url
Tag
Img
Thumb
good shot of winch mount to frame brackets, 2 for each side (one is back behind the bumper mount bra...
Url
Tag
Img
Thumb
shot of mount from underneath looking toward the front. Note how it's cut back around the accordian...
Url
Tag
Img
Thumb
rearmost bracket
Url
Tag
Img
Thumb
one more shot looking underneath, toward the driver side of the vehicle.
Url
Tag
Img
Thumb
closeup of solenoid
Url
Tag
Img
Thumb
solenoid mount again, this time with Grille removed. Note black plastic edging to protect cables. ...
Url
Tag
Img
Thumb
beginning to work on the shackle to frame attachment. 1" x 2" x 6" steel
Url
Tag
Img
Thumb
yep, that's 6"
Url
Tag
Img
Thumb
once the 1" hole is cut, it needs to be carefully measured for the (2) 1/2" mounting holes. (the 1/...
Url
Tag
Img
Thumb
end result. Well not quite. It needs to ber purdied up at this point.
Url
Tag
Img
Thumb
another angle
Url
Tag
Img
Thumb
some of my recovery stuff, 6T WLL snatch block,10' x 2"(double wound) tree strap, 3/4" 4.75WLL D sha...
Url
Tag
Img
Thumb
  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog