michael collins > 1983 Ford Bronco > open folder Trailer

i found this on Craigs list for free.
Hits: 425
Size: 104.53 KB
Posted: 4/21/07
i found this on Craigs list for free.		this boat was in poor shape.
Hits: 649
Size: 77.39 KB
Posted: 4/21/07
this boat was in poor shape.		here is the last picture of the boat.
Hits: 459
Size: 90.71 KB
Posted: 4/21/07
here is the last picture of the boat.		This was an old boat trailer that i am making into a Flat 6'X10" trailer.
Hits: 473
Size: 96.6 KB
Posted: 5/17/05
This was an old boat trailer that i am making into a Flat 6'X10" trailer.		I need to fix the tounge and the pivet mount was damaged so i cut out the old bolt.
Hits: 492
Size: 103.47 KB
Posted: 5/17/05
I need to fix the tounge and the pivet mount was damaged so i cut out the old bolt.
while getting parts i found this chipper shipping create. the store owner said get it out of here......
Hits: 500
Size: 73.06 KB
Posted: 9/26/05
while getting parts i found this chipper shipping create. the store owner said get it out of here......		this was the rest or the top of the create. 2"X2" thin stock.
Hits: 500
Size: 83.95 KB
Posted: 9/26/05
this was the rest or the top of the create. 2"X2" thin stock.		here is the base all cut and getting ready to re-weld the correct way.not bad for free...
Hits: 405
Size: 98.31 KB
Posted: 9/26/05
here is the base all cut and getting ready to re-weld the correct way.not bad for free...		ok- it been awhile but some of the plans changed. i got this back out on the side yard and started t...
Hits: 481
Size: 71.22 KB
Posted: 4/2/07
ok- it been awhile but some of the plans changed. i got this back out on the side yard and started t...		this is what i came up with i welded in a round stock in the square tubing to give a better weld ang...
Hits: 395
Size: 60.08 KB
Posted: 4/2/07
this is what i came up with i welded in a round stock in the square tubing to give a better weld ang...
here is the top view of the new hinge.
Hits: 422
Size: 50.25 KB
Posted: 4/2/07
here is the top view of the new hinge.		i then took a tire iron and chopped the rod to the correct size. i then drilled and pinned the hing...
Hits: 405
Size: 73.79 KB
Posted: 4/2/07
i then took a tire iron and chopped the rod to the correct size. i then drilled and pinned the hing...		out came the axle. i had many different ideas on size but the final size is going to be 4X9 or 4X10.
Hits: 418
Size: 73.59 KB
Posted: 4/2/07
out came the axle. i had many different ideas on size but the final size is going to be 4X9 or 4X10.		i had this steel shelf sitting on the side of the house and it was 42" wide so i chopped in half. I ...
Hits: 423
Size: 71.08 KB
Posted: 4/2/07
i had this steel shelf sitting on the side of the house and it was 42" wide so i chopped in half. I ...		Here is the other side. it is almost ready for the deck and sides.
Hits: 418
Size: 74.21 KB
Posted: 4/2/07
Here is the other side. it is almost ready for the deck and sides.
now the deck is all weleded. here is the front lower deck protection and start of the side.
Hits: 451
Size: 71.35 KB
Posted: 4/8/07
now the deck is all weleded. here is the front lower deck protection and start of the side.		i installed the front leg and wheel.
Hits: 470
Size: 76.78 KB
Posted: 4/8/07
i installed the front leg and wheel.		here is another view of the completed deck.
Hits: 634
Size: 68.46 KB
Posted: 4/8/07
here is another view of the completed deck.		with the corner posts in place i was tring a few different sides rails and supports. this was the fi...
Hits: 477
Size: 86.89 KB
Posted: 4/8/07
with the corner posts in place i was tring a few different sides rails and supports. this was the fi...		here is what it will look like from behind. i do not need the 2 supports in the front but it looks b...
Hits: 477
Size: 78.2 KB
Posted: 4/8/07
here is what it will look like from behind. i do not need the 2 supports in the front but it looks b...
here is what it will look like from the front.
Hits: 442
Size: 95.31 KB
Posted: 4/8/07
here is what it will look like from the front.		ok all the sides and rails are done. i just need to add the floor and wireing for the lights. then p...
Hits: 444
Size: 77.35 KB
Posted: 4/8/07
ok all the sides and rails are done. i just need to add the floor and wireing for the lights. then p...		just need the lights and saftey chain and the other fender and she is ready to roll.
Hits: 465
Size: 79.31 KB
Posted: 4/8/07
just need the lights and saftey chain and the other fender and she is ready to roll.		here it is from the front. i put the bed liner in to see how it look completed.
Hits: 405
Size: 76.23 KB
Posted: 4/8/07
here it is from the front. i put the bed liner in to see how it look completed.		here is is from the rear.
Hits: 452
Size: 79.2 KB
Posted: 4/8/07
here is is from the rear.
i got the sides all welded in place.and a coat of flat black on the metal.
Hits: 414
Size: 75.48 KB
Posted: 4/21/07
i got the sides all welded in place.and a coat of flat black on the metal.		here is the front almost done.
Hits: 652
Size: 73.56 KB
Posted: 4/21/07
here is the front almost done.		here it is with a new floor.
Hits: 434
Size: 65.37 KB
Posted: 4/21/07
here it is with a new floor.		i got a set of trailer lights from home depot. $20
Hits: 418
Size: 64.66 KB
Posted: 4/21/07
i got a set of trailer lights from home depot. $20		here is the back of the light package.
Hits: 411
Size: 55.55 KB
Posted: 4/21/07
here is the back of the light package.
here is the light kit open.
Hits: 441
Size: 74.19 KB
Posted: 4/21/07
here is the light kit open.		i bolted the lights in place. looking good.
Hits: 412
Size: 69.15 KB
Posted: 4/21/07
i bolted the lights in place. looking good.		here is the light installed on the pass side.
Hits: 416
Size: 66.9 KB
Posted: 4/21/07
here is the light installed on the pass side.		here is the safety chain anchor.
Hits: 435
Size: 62.18 KB
Posted: 4/21/07
here is the safety chain anchor.		you can see the light and the shocks installed.
Hits: 437
Size: 65.39 KB
Posted: 4/21/07
you can see the light and the shocks installed.
here is the pass side shock installed
Hits: 414
Size: 60.74 KB
Posted: 4/21/07
here is the pass side shock installed		here is the pass side fender installed.
Hits: 424
Size: 80.03 KB
Posted: 4/21/07
here is the pass side fender installed.		here is the driver side. it turned out good. Time to register it and go put it to work.
Hits: 467
Size: 69.1 KB
Posted: 4/21/07
here is the driver side. it turned out good. Time to register it and go put it to work.		here is the final part the safety chain installed.
Hits: 430
Size: 68.73 KB
Posted: 5/15/07
here is the final part the safety chain installed. 		here is the trailer with the new deck and some of the corners clipped.This was a great project.
Hits: 659
Size: 56.98 KB
Posted: 7/3/07
here is the trailer with the new deck and some of the corners clipped.This was a great project.
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog