1983 Ford Bronco Trailer pictures, videos, and sounds | SuperMotors.net

michael collins > 1983 Ford Bronco > Trailer

i found this on Craigs list for free.

Url
Tag
Img
Thumb

this boat was in poor shape.

Url
Tag
Img
Thumb

here is the last picture of the boat.

Url
Tag
Img
Thumb

This was an old boat trailer that i am making into a Flat 6'X10" trailer.

Url
Tag
Img
Thumb

I need to fix the tounge and the pivet mount was damaged so i cut out the old bolt.

Url
Tag
Img
Thumb

while getting parts i found this chipper shipping create. the store owner said get it out of here......

Url
Tag
Img
Thumb

this was the rest or the top of the create. 2"X2" thin stock.

Url
Tag
Img
Thumb

here is the base all cut and getting ready to re-weld the correct way.not bad for free...

Url
Tag
Img
Thumb

ok- it been awhile but some of the plans changed. i got this back out on the side yard and started t...

Url
Tag
Img
Thumb

this is what i came up with i welded in a round stock in the square tubing to give a better weld ang...

Url
Tag
Img
Thumb

here is the top view of the new hinge.

Url
Tag
Img
Thumb

i then took a tire iron and chopped the rod to the correct size. i then drilled and pinned the hing...

Url
Tag
Img
Thumb

out came the axle. i had many different ideas on size but the final size is going to be 4X9 or 4X10.

Url
Tag
Img
Thumb

i had this steel shelf sitting on the side of the house and it was 42" wide so i chopped in half. I ...

Url
Tag
Img
Thumb

Here is the other side. it is almost ready for the deck and sides.

Url
Tag
Img
Thumb

now the deck is all weleded. here is the front lower deck protection and start of the side.

Url
Tag
Img
Thumb

i installed the front leg and wheel.

Url
Tag
Img
Thumb

here is another view of the completed deck.

Url
Tag
Img
Thumb

with the corner posts in place i was tring a few different sides rails and supports. this was the fi...

Url
Tag
Img
Thumb

here is what it will look like from behind. i do not need the 2 supports in the front but it looks b...

Url
Tag
Img
Thumb

here is what it will look like from the front.

Url
Tag
Img
Thumb

ok all the sides and rails are done. i just need to add the floor and wireing for the lights. then p...

Url
Tag
Img
Thumb

just need the lights and saftey chain and the other fender and she is ready to roll.

Url
Tag
Img
Thumb

here it is from the front. i put the bed liner in to see how it look completed.

Url
Tag
Img
Thumb

here is is from the rear.

Url
Tag
Img
Thumb

i got the sides all welded in place.and a coat of flat black on the metal.

Url
Tag
Img
Thumb

here is the front almost done.

Url
Tag
Img
Thumb

here it is with a new floor.

Url
Tag
Img
Thumb

i got a set of trailer lights from home depot. $20

Url
Tag
Img
Thumb

here is the back of the light package.

Url
Tag
Img
Thumb

here is the light kit open.

Url
Tag
Img
Thumb

i bolted the lights in place. looking good.

Url
Tag
Img
Thumb

here is the light installed on the pass side.

Url
Tag
Img
Thumb

here is the safety chain anchor.

Url
Tag
Img
Thumb

you can see the light and the shocks installed.

Url
Tag
Img
Thumb

here is the pass side shock installed

Url
Tag
Img
Thumb

here is the pass side fender installed.

Url
Tag
Img
Thumb

here is the driver side. it turned out good. Time to register it and go put it to work.

Url
Tag
Img
Thumb

here is the final part the safety chain installed.

Url
Tag
Img
Thumb

here is the trailer with the new deck and some of the corners clipped.This was a great project.

Url
Tag
Img
Thumb

← Back to this registry's album

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog