|
|
Hits: 502
Size: 91.54 KB
Posted: 8/23/05
Here s the bag of hardware that came with the drop mounts. the kit part number is CHB542 this is for... | 
Hits: 739
Size: 94.84 KB
Posted: 8/23/05
here are the Class II skyjacker drop mounts. Alot stronger than most of the other drop mounts on the... | 
Hits: 596
Size: 93.57 KB
Posted: 8/23/05
here is a side view. these have bracing thru the center and are heavey duty. The top black bar is a ... | 
Hits: 759
Size: 96.56 KB
Posted: 8/23/05
Here is the other side view. | 
Hits: 612
Size: 94.63 KB
Posted: 8/23/05
Here is a closer view on the bench. |
Hits: 647
Size: 75.97 KB
Posted: 8/29/05
here is a back side shot of the standard 4" drop mount and the skyjacker Class II 4 or 6" drop mount... | 
Hits: 833
Size: 87.71 KB
Posted: 8/29/05
Here is a front view of the standard 4" drop and the class II | 
Hits: 750
Size: 72.01 KB
Posted: 8/29/05
here is a back side view of the driverside mount. | 
Hits: 776
Size: 110.97 KB
Posted: 8/29/05
Here is the pass side Class II drop mount next to the standard 4" drop mount and "Helper Christain" | 
Hits: 640
Size: 102.8 KB
Posted: 8/29/05
big difference in the Class II and the standard 4" drop mount. |
Hits: 826
Size: 103.35 KB
Posted: 8/29/05
this is what i do to hold the TTB as i did the swap. i put upward presure on the outside of the beam... | 
Hits: 550
Size: 72.3 KB
Posted: 8/24/05
The stock mount needs to come out. there are 6 rivets that need to be removed.. i hate these revits.... | 
Hits: 841
Size: 105.38 KB
Posted: 8/24/05
Here is the back of the pass side (on drivers side) 4" drop mount. It is in the stock pivot mount an... | 
Hits: 913
Size: 105.51 KB
Posted: 8/29/05
Removing the rivets. I hate rivets i had to cut the added weld on the 4" drop mount and then cut dri... | 
Hits: 708
Size: 106.51 KB
Posted: 8/29/05
it is fighting alot but it will loose. this is the 1/2 way point for the mount coming out. |
Hits: 608
Size: 86.25 KB
Posted: 8/29/05
after drilling, cutting the heads off, and 2 hours of air chisling it finall gave up. this mount was... | 
Hits: 791
Size: 94.38 KB
Posted: 8/29/05
it fought hard but i did win finally. I hate rivets... | 
Hits: 584
Size: 99.22 KB
Posted: 8/29/05
this was the halfway mark and "Helper Josh" wanted to get a mug shot. | 
Hits: 749
Size: 90.8 KB
Posted: 8/29/05
anothe "Helper Josh" mug shot at the Halfway strech. | 
Hits: 909
Size: 89.3 KB
Posted: 8/29/05
extream close up of the pass side drop mount. |
Hits: 603
Size: 93.65 KB
Posted: 8/29/05
here is a drivers side view of the new mounts in place. | 
Hits: 863
Size: 95.79 KB
Posted: 8/29/05
Here is a view fron the pass side wheel well. | 
Hits: 743
Size: 94.82 KB
Posted: 8/29/05
Here is the result with the class II mount installed and it just set back under it own weight. it on... | 
Hits: 770
Size: 94.85 KB
Posted: 8/29/05
Pass side wheel after install. | 
Hits: 954
Size: 92.87 KB
Posted: 8/29/05
here is a front shot with both mounts in place. Time to do a Knuckle under to reduce the steering an... |
Hits: 893
Size: 98.03 KB
Posted: 9/7/05
No more "Pigen Toe" it rides alot better. i still got to replace a tie rod and ball joint. | | | | |
Sky Jacker Class II TTB drop mounts