michael collins > 1983 Ford Bronco > open folder Sky Jacker Class II TTB drop mounts

Here s the bag of hardware that came with the drop mounts. the kit part number is CHB542 this is for...
Url
Tag
Img
Thumb
here are the Class II skyjacker drop mounts. Alot stronger than most of the other drop mounts on the...
Url
Tag
Img
Thumb
here is a side view. these have bracing thru the center and are heavey duty. The top black bar is a ...
Url
Tag
Img
Thumb
Here is the other side view.
Url
Tag
Img
Thumb
Here is a closer view on the bench.
Url
Tag
Img
Thumb
here is a back side shot of the standard 4" drop mount and the skyjacker Class II 4 or 6" drop mount...
Url
Tag
Img
Thumb
Here is a front view of the standard 4" drop and the class II
Url
Tag
Img
Thumb
here is a back side view of the driverside mount.
Url
Tag
Img
Thumb
Here is the pass side Class II drop mount next to the standard 4" drop mount and "Helper Christain"
Url
Tag
Img
Thumb
big difference in the Class II and the standard 4" drop mount.
Url
Tag
Img
Thumb
this is what i do to hold the TTB as i did the swap. i put upward presure on the outside of the beam...
Url
Tag
Img
Thumb
The stock mount needs to come out. there are 6 rivets that need to be removed.. i hate these revits....
Url
Tag
Img
Thumb
Here is the back of the pass side (on drivers side) 4" drop mount. It is in the stock pivot mount an...
Url
Tag
Img
Thumb
Removing the rivets. I hate rivets i had to cut the added weld on the 4" drop mount and then cut dri...
Url
Tag
Img
Thumb
it is fighting alot but it will loose. this is the 1/2 way point for the mount coming out.
Url
Tag
Img
Thumb
after drilling, cutting the heads off, and 2 hours of air chisling it finall gave up. this mount was...
Url
Tag
Img
Thumb
it fought hard but i did win finally. I hate rivets...
Url
Tag
Img
Thumb
this was the halfway mark and "Helper Josh" wanted to get a mug shot.
Url
Tag
Img
Thumb
anothe "Helper Josh" mug shot at the Halfway strech.
Url
Tag
Img
Thumb
extream close up of the pass side drop mount.
Url
Tag
Img
Thumb
here is a drivers side view of the new mounts in place.
Url
Tag
Img
Thumb
Here is a view fron the pass side wheel well.
Url
Tag
Img
Thumb
Here is the result with the class II mount installed and it just set back under it own weight. it on...
Url
Tag
Img
Thumb
Pass side wheel after install.
Url
Tag
Img
Thumb
here is a front shot with both mounts in place. Time to do a Knuckle under to reduce the steering an...
Url
Tag
Img
Thumb
No more "Pigen Toe" it rides alot better. i still got to replace a tie rod and ball joint.
Url
Tag
Img
Thumb
    
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog