|
|
Hits: 585
Size: 73.21 KB
Posted: 5/3/06
All Jobs need a supervisor. This was mine for this project. | 
Hits: 733
Size: 68.19 KB
Posted: 8/13/06
here are the stock and the extended arms. these are 15" longer than stock. | 
Hits: 574
Size: 73.8 KB
Posted: 8/13/06
the tape is hare to see but it is 15" longer than stock. | 
Hits: 606
Size: 63.49 KB
Posted: 8/13/06
here is a top view. | 
Hits: 592
Size: 66.17 KB
Posted: 8/13/06
top again |
Hits: 624
Size: 74.2 KB
Posted: 8/13/06
stock and extended. | 
Hits: 567
Size: 33.71 KB
Posted: 8/13/06
The new arms are 15" longer than stock so new holes need to be drilled 15" farther back than stock. ... | 
Hits: 618
Size: 44.76 KB
Posted: 8/13/06
i just unbolted one front mount bolt and then put the jig in the hole and line the new mount in the ... | 
Hits: 607
Size: 58.66 KB
Posted: 5/3/06
here is a 2nd shot of the axle | 
Hits: 662
Size: 62.05 KB
Posted: 5/3/06
here is the axle stripped down to the bare arms. |
Hits: 623
Size: 102.02 KB
Posted: 11/1/06
Here ar the superlift 4" radius arm drop mounts. it was good i was replacing the arms. The mounts we... | 
Hits: 567
Size: 96.93 KB
Posted: 11/1/06
Here is the pass side rear frame. | 
Hits: 534
Size: 83.92 KB
Posted: 11/9/06
sorry this is dark but this is the old 4" drop mount setup in the bronco as i got it. | 
Hits: 1128
Size: 67.78 KB
Posted: 12/28/06
here are the stock arms with the 4" radius arm drop mounts. | 
Hits: 592
Size: 88.74 KB
Posted: 11/9/06
Here is a side shot of the old arms. |
Hits: 537
Size: 57 KB
Posted: 12/28/06
this is the inside of the frame rail | 
Hits: 534
Size: 42.69 KB
Posted: 12/28/06
here are the stock radius arms. i cleaned them and gave a fast coat of gloss paint. | 
Hits: 540
Size: 64.89 KB
Posted: 12/28/06
here is the other arm waiting to dry. | 
Hits: 559
Size: 56.48 KB
Posted: 12/28/06
i took the stock radius arm mounts and clamped them to the frame. i used the jig to make sure they w... | 
Hits: 533
Size: 44.74 KB
Posted: 12/28/06
here is the inside of the pass side frame. |
Hits: 588
Size: 54.03 KB
Posted: 12/28/06
here is the pass side mount. you can see the holes o marked. that is the fuel tank vent line. i move... | 
Hits: 553
Size: 56.13 KB
Posted: 12/28/06
hereis the new marked holes on the driver side frame rail. | 
Hits: 579
Size: 45.38 KB
Posted: 12/28/06
Here is the new mount in the new location. i wanted to see how it fit. | 
Hits: 553
Size: 67.29 KB
Posted: 12/28/06
here is the new mount withthe pilot holes drilled. | 
Hits: 698
Size: 58.66 KB
Posted: 12/28/06
here is another view of the arms missing. |
Hits: 778
Size: 63.39 KB
Posted: 5/3/06
here is the new arm installed and the old one below. | 
Hits: 940
Size: 51.59 KB
Posted: 7/20/06
Here is the rear of the new extended arms. I used some stock no lift radius arm mounts. you can see ... | 
Hits: 764
Size: 78.96 KB
Posted: 5/3/06
here they are installed. | | |
Extended Radius arms