michael collins > 1983 Ford Bronco > open folder Cowl

The old cowl allows leaves and large junk to fall in the holes and down into the heatorbox and vent....
Hits: 435
Size: 90.16 KB
Posted: 10/15/06
The old cowl allows leaves and large junk to fall in the holes and down into the heatorbox and vent....		with a few screws and removing the washer hose the old cowl was off.
Hits: 465
Size: 88.51 KB
Posted: 10/15/06
with a few screws and removing the washer hose the old cowl was off.		you can see all the crap that falls thru the slots. this is just the top side too.
Hits: 529
Size: 99.24 KB
Posted: 10/15/06
you can see all the crap that falls thru the slots. this is just the top side too.		Here is another pic of under the stock cowl.
Hits: 511
Size: 94.7 KB
Posted: 10/15/06
Here is another pic of under the stock cowl.		A co-FSB member gave me this cowl. it got dual washer heads and no slots. so i washed it and hit it ...
Hits: 508
Size: 88.28 KB
Posted: 10/15/06
A co-FSB member gave me this cowl. it got dual washer heads and no slots. so i washed it and hit it ...
here is the stock 1983 and the 1992 cowl. i was in such a hurry i did not see th body shape differen...
Hits: 512
Size: 129.9 KB
Posted: 10/15/06
here is the stock 1983 and the 1992 cowl. i was in such a hurry i did not see th body shape differen...		Well i had all the parts i needed. so after looking a few times at what was different i found it was...
Hits: 484
Size: 78.58 KB
Posted: 10/15/06
Well i had all the parts i needed. so after looking a few times at what was different i found it was...		Afte many measurements i just pop riveted the ends on.
Hits: 511
Size: 87.53 KB
Posted: 10/15/06
Afte many measurements i just pop riveted the ends on.		A few more rivets and the drivers side was done. i hit another coat of flat black to blend in the pa...
Hits: 523
Size: 97.32 KB
Posted: 10/15/06
A few more rivets and the drivers side was done. i hit another coat of flat black to blend in the pa...		Here is the pass side. i did the same cut-measure-rivet-paint trick here.
Hits: 477
Size: 91.64 KB
Posted: 10/15/06
Here is the pass side. i did the same cut-measure-rivet-paint trick here.
well it fits good now. here is the shot from the center.
Hits: 494
Size: 102.25 KB
Posted: 10/15/06
well it fits good now. here is the shot from the center.		Here is the pass side. it looks better than the stock slotted cowl. the patch looks ok
Hits: 530
Size: 72.75 KB
Posted: 10/15/06
Here is the pass side. it looks better than the stock slotted cowl. the patch looks ok		I not sure what happened but the drivers side had a gap, but it works for a trail truck/driver truck...
Hits: 452
Size: 64.92 KB
Posted: 10/15/06
I not sure what happened but the drivers side had a gap, but it works for a trail truck/driver truck...		here is a side shot. it turned out just ok since the gap was bigger than i liked.
Hits: 503
Size: 73.57 KB
Posted: 10/15/06
here is a side shot. it turned out just ok since the gap was bigger than i liked.		well it got the best of me. i done a few trips to the junk yard for other parts and i kept seening t...
Hits: 517
Size: 92.94 KB
Posted: 10/15/06
well it got the best of me. i done a few trips to the junk yard for other parts and i kept seening t...
well it got the best of me again since the dual washer worked so much better. i decided to cut them ...
Hits: 484
Size: 92.25 KB
Posted: 10/15/06
well it got the best of me again since the dual washer worked so much better. i decided to cut them ...		    
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog