michael collins > 1983 Ford Bronco > open folder Roll Cage

I want to install a full cage but i needed a starting point and i saw this roll bar in the local pap...
Hits: 775
Size: 69.44 KB
Posted: 10/26/06
I want to install a full cage but i needed a starting point and i saw this roll bar in the local pap...		Here is a shot from the rear. it looks good to install.
Hits: 567
Size: 86.97 KB
Posted: 10/26/06
Here is a shot from the rear. it looks good to install.		it is 42" high. it looks like it will drop right in.
Hits: 583
Size: 82.98 KB
Posted: 10/26/06
it is 42" high. it looks like it will drop right in.		Well it looked like it go right in. so now it is time to see where i want this to sit. i want this t...
Hits: 600
Size: 91.6 KB
Posted: 10/26/06
Well it looked like it go right in. so now it is time to see where i want this to sit. i want this t...		This is where the stock GT bar would go but i cut the foot and slide it back. this is the pass side.
Hits: 885
Size: 100.69 KB
Posted: 10/26/06
This is where the stock GT bar would go but i cut the foot and slide it back. this is the pass side.
Here is the rear leg pass side. (lots of rust on the floor surface. this is how she came to me i goi...
Hits: 587
Size: 96.99 KB
Posted: 10/26/06
Here is the rear leg pass side. (lots of rust on the floor surface. this is how she came to me i goi...		here is the driver side rear leg.
Hits: 572
Size: 89.01 KB
Posted: 10/26/06
here is the driver side rear leg.		here is a side shot to show if i mounted in the GT Bar position where the rear leg would go. i decid...
Hits: 549
Size: 94.27 KB
Posted: 10/26/06
here is a side shot to show if i mounted in the GT Bar position where the rear leg would go. i decid...		1st job cut the front mount so i can move the roll bar back to the correct install spot.
Hits: 543
Size: 87.3 KB
Posted: 10/26/06
1st job cut the front mount so i can move the roll bar back to the correct install spot.		i had some 6" angle sitting in the shop. so i drilled a few mounting holes and cleaned the welding a...
Hits: 613
Size: 121.56 KB
Posted: 10/26/06
i had some 6" angle sitting in the shop. so i drilled a few mounting holes and cleaned the welding a...
here the new foot is welded to the roll bar. I am not a great welder but it is looking alot better.
Hits: 559
Size: 104.53 KB
Posted: 10/26/06
here the new foot is welded to the roll bar. I am not a great welder but it is looking alot better.		here is the front foot on the new mount. this is a strong point inthe bronco.
Hits: 570
Size: 70.9 KB
Posted: 10/26/06
here is the front foot on the new mount. this is a strong point inthe bronco.		here is a front shot of the mount and roll bar.
Hits: 544
Size: 99.85 KB
Posted: 10/26/06
here is a front shot of the mount and roll bar.		here is how it goes together on the pass side.
Hits: 548
Size: 86.19 KB
Posted: 10/26/06
here is how it goes together on the pass side.		Here it is bolted to the floor. i going to add a plate and bar thru the floor to the frame soon but ...
Hits: 722
Size: 77.52 KB
Posted: 10/26/06
Here it is bolted to the floor. i going to add a plate and bar thru the floor to the frame soon but ...
Here is how the rear legs bolt down to a plate under the floor. it too will get extensions down to t...
Hits: 585
Size: 91.61 KB
Posted: 10/26/06
Here is how the rear legs bolt down to a plate under the floor. it too will get extensions down to t...		here is the pass side installed.
Hits: 596
Size: 79.01 KB
Posted: 10/26/06
here is the pass side installed.		i made sure there was room to install the top and install and remove the top bolts. this will be a ...
Hits: 1209
Size: 96.87 KB
Posted: 10/26/06
i made sure there was room to install the top and install and remove the top bolts. this will be a ...		Here it is a few feet back. i am happy with this install. The kids like to hang on the bar as we go ...
Hits: 641
Size: 90.42 KB
Posted: 10/26/06
Here it is a few feet back. i am happy with this install. The kids like to hang on the bar as we go ...		 
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog