Here is the stock front bronco seat. it has a cover over it and is in good condition.

The drivers seat bely was cut and the cuppling end was tied in a knot. One trip to the junk yard fixed this. Here was the replacement driver seat belt.

Here is anothr view of the seat belt for the drivers side.

The PO had beat this truck up and installed the wrong belts in it. the new correct belt is on the top and the one that was installed was on the bottom. it was hard to buckle the belt and drive so out with the wrong and in with the correct.

a different view of the correct belt bottom. I did not connect the belt sensor. the wires were gone on my bronco.

a different view of the correct belt bottom. I did not connect the belt sensor. the wires were gone on my bronco.

the seatbelt bolts were rotted out and i got new replacements.

i got new belt bolts and a few spare top long bolts.

this is the pass seat. the release lever was broken and it was hard to release the rear seat and get in or out of the back seat. the lever falls off and no return spring.

i got (from the junk yard) a c-clip and release rod and rod bushing. i used a throddle return spring for the return spring. this works great now.

Here is another view of the fixed seat.

Now this release works great.

finally after so manr junk yard runs i found a passs side seat belt anchor

here it is after a bath. it had all sorts of things stuck to it. food, trash and unknown stuff.

here is a closer view. all the plastic is in good shape and now it is clean and ready to in stall.

the issue withthe rear seat was the bet ends were missing. i opened the retractors and found the ends. so i rebuilt the retractors and re- riveted the covers bak on and they work great.

Here is a view from the top of the rear set showing all the belts.

This is how she looked when i finally was able to open the rear tailgate. The truck was a mess.

Here is the back all de-trashed and vaccumed. looks much better.

well the old seats are out and ready to be sold.

Here is the side view of the stock seats.

Here is a shot of the drivers side of the seats. these were in good condition. they were sold fast as the track were in great condition.

sometimes good things happen. ithese were going in a 78 ford flatbed but the floor pan was so different it was not worth it to him so i got them. new captains chairs and center box. these are in good shape and have arm rests. this was a direct bolt in swap.