michael collins > 1983 Ford Bronco > open folder Brakes

Here was the pass side rotor as i got t. time to get a new one.
Hits: 431
Size: 102.35 KB
Posted: 11/9/06
Here was the pass side rotor as i got t. time to get a new one.		Well as i was working on the bronco i found the front brakes were in bad shape. Here is the pass sid...
Hits: 437
Size: 81.54 KB
Posted: 10/27/06
Well as i was working on the bronco i found the front brakes were in bad shape. Here is the pass sid...		Here is the original drivers side setup.
Hits: 423
Size: 99.84 KB
Posted: 10/27/06
Here is the original drivers side setup.		Here are the old calipers. i was going to rebuild them but they are $26 each remanufatured. So off t...
Hits: 424
Size: 105.91 KB
Posted: 10/27/06
Here are the old calipers. i was going to rebuild them but they are $26 each remanufatured. So off t...		Here is another view of the old calipers.
Hits: 410
Size: 99.44 KB
Posted: 10/27/06
Here is another view of the old calipers.
Here are the new calipers. I hit them with some paint i had in the shop. they were bare metal.
Hits: 424
Size: 80.64 KB
Posted: 10/27/06
Here are the new calipers. I hit them with some paint i had in the shop. they were bare metal.		Here is another view of the new painted calipers.
Hits: 428
Size: 82.68 KB
Posted: 10/27/06
Here is another view of the new painted calipers.		Well i wanted to get extended lines and all the prepacked kits were $100 and up. i visited Teegarden...
Hits: 811
Size: 72.44 KB
Posted: 10/27/06
Well i wanted to get extended lines and all the prepacked kits were $100 and up. i visited Teegarden...		Here are the old brake lines and the new brake lines. Nice braided steel over teflon line.
Hits: 714
Size: 97.82 KB
Posted: 10/27/06
Here are the old brake lines and the new brake lines. Nice braided steel over teflon line.		Here is another view of the old and new lines.
Hits: 420
Size: 104.86 KB
Posted: 10/27/06
Here is another view of the old and new lines.
To get the new lines to work with the bronco i needed to install AN adapters. on the drivers side fr...
Hits: 450
Size: 92.27 KB
Posted: 10/27/06
To get the new lines to work with the bronco i needed to install AN adapters. on the drivers side fr...		I repeated this process on the Pass side of the bronco.
Hits: 420
Size: 67.91 KB
Posted: 10/27/06
I repeated this process on the Pass side of the bronco.		Here is pass side almost ready to be reinstalled. I found these "S" hooks at the local swap meet. ni...
Hits: 404
Size: 92.24 KB
Posted: 11/3/06
Here is pass side almost ready to be reinstalled. I found these "S" hooks at the local swap meet. ni...		I put the caliper back on and installed the line
Hits: 437
Size: 97.48 KB
Posted: 10/27/06
I put the caliper back on and installed the line		Here is another view of the new line and caliper.
Hits: 467
Size: 97.4 KB
Posted: 10/27/06
Here is another view of the new line and caliper.
the drivers side is now completed. The rotor looks good and will not need to be replaced at this tim...
Hits: 417
Size: 94.87 KB
Posted: 10/27/06
the drivers side is now completed. The rotor looks good and will not need to be replaced at this tim...		Here is the pass side done. i needed to roll the truck around so the bad caliper will still stay on ...
Hits: 459
Size: 102.99 KB
Posted: 10/27/06
Here is the pass side done. i needed to roll the truck around so the bad caliper will still stay on ...		   
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog