michael collins > 1983 Ford Bronco > open folder Brakes

Here was the pass side rotor as i got t. time to get a new one.
Url
Tag
Img
Thumb
Well as i was working on the bronco i found the front brakes were in bad shape. Here is the pass sid...
Url
Tag
Img
Thumb
Here is the original drivers side setup.
Url
Tag
Img
Thumb
Here are the old calipers. i was going to rebuild them but they are $26 each remanufatured. So off t...
Url
Tag
Img
Thumb
Here is another view of the old calipers.
Url
Tag
Img
Thumb
Here are the new calipers. I hit them with some paint i had in the shop. they were bare metal.
Url
Tag
Img
Thumb
Here is another view of the new painted calipers.
Url
Tag
Img
Thumb
Well i wanted to get extended lines and all the prepacked kits were $100 and up. i visited Teegarden...
Url
Tag
Img
Thumb
Here are the old brake lines and the new brake lines. Nice braided steel over teflon line.
Url
Tag
Img
Thumb
Here is another view of the old and new lines.
Url
Tag
Img
Thumb
To get the new lines to work with the bronco i needed to install AN adapters. on the drivers side fr...
Url
Tag
Img
Thumb
I repeated this process on the Pass side of the bronco.
Url
Tag
Img
Thumb
Here is pass side almost ready to be reinstalled. I found these "S" hooks at the local swap meet. ni...
Url
Tag
Img
Thumb
I put the caliper back on and installed the line
Url
Tag
Img
Thumb
Here is another view of the new line and caliper.
Url
Tag
Img
Thumb
the drivers side is now completed. The rotor looks good and will not need to be replaced at this tim...
Url
Tag
Img
Thumb
Here is the pass side done. i needed to roll the truck around so the bad caliper will still stay on ...
Url
Tag
Img
Thumb
   
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog