michael collins > 1983 Ford Bronco > open folder Pivot Bushings

Here is the stock pivet mount bushing (i was replacing the TTB drop mount so it is not in the pictur...
Url
Tag
Img
Thumb
Here was the old pivet mount. they tack welded it in place.
Url
Tag
Img
Thumb
the old mounts do not come out too easy. i used the drill many holes in the rubber and then an air c...
Url
Tag
Img
Thumb
I did the bushings on the bronco. i put the jack stand on the outer axle and used the floor jack as ...
Url
Tag
Img
Thumb
Here is the tool you will want to get if you are installing new bushings. i could have used this to ...
Url
Tag
Img
Thumb
This is after i drilled out the rubber and used the air hammer to punch out the shell.
Url
Tag
Img
Thumb
Here is the new bushing installed and ready to go in the new mount.
Url
Tag
Img
Thumb
Here is a close up of the new bushing.
Url
Tag
Img
Thumb
  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog