michael collins > 1983 Ford Bronco > open folder Steering Stablizer

I found this mount to be another reason for the "Death Wobble" the PO just welded a chunk of scrap t...
Hits: 588
Size: 72.96 KB
Posted: 10/27/06
I found this mount to be another reason for the "Death Wobble" the PO just welded a chunk of scrap t...		Here is a closer view. you can see this weld is no longer holding the mount.
Hits: 516
Size: 67.77 KB
Posted: 10/27/06
Here is a closer view. you can see this weld is no longer holding the mount.		Here is the issue when the wieght is on the wheels. this is bending the shock mount and locking arou...
Hits: 551
Size: 59.44 KB
Posted: 10/27/06
Here is the issue when the wieght is on the wheels. this is bending the shock mount and locking arou...		I unbolted the shock and then grabbed the mount and it came right off. here is the old mount.
Hits: 532
Size: 86.58 KB
Posted: 10/27/06
I unbolted the shock and then grabbed the mount and it came right off. here is the old mount.		Here is the back side of the old mount.
Hits: 497
Size: 119.88 KB
Posted: 11/1/06
Here is the back side of the old mount.
here is the frame where the mount tore off of. you can see the 2 holes in the frame i used these wit...
Hits: 486
Size: 75 KB
Posted: 10/27/06
here is the frame where the mount tore off of. you can see the 2 holes in the frame i used these wit...		this was an issues the shock was pinned around the swaybar.
Hits: 484
Size: 75.53 KB
Posted: 11/1/06
this was an issues the shock was pinned around the swaybar. 		These 2 holes were already in the frame. i just needed to open them up alittle.
Hits: 481
Size: 54.67 KB
Posted: 11/1/06
These 2 holes were already in the frame. i just needed to open them up alittle.		I found this in the center storage container.
Hits: 467
Size: 89.63 KB
Posted: 11/1/06
I found this in the center storage container.		This is the stablizer the boot is old and beatup but the shock was new. as were the bushings. i deci...
Hits: 497
Size: 89.86 KB
Posted: 11/1/06
This is the stablizer the boot is old and beatup but the shock was new. as were the bushings. i deci...
Here are all the parts for the new mount. new poly end links, new boot, mount, and bolts.
Hits: 524
Size: 94.9 KB
Posted: 11/1/06
Here are all the parts for the new mount. new poly end links, new boot, mount, and bolts.		I drilled the holes larger to fit bigger grade 8 bolts.
Hits: 513
Size: 76.78 KB
Posted: 10/27/06
I drilled the holes larger to fit bigger grade 8 bolts.		this is the back side of the mount.
Hits: 515
Size: 113.8 KB
Posted: 11/9/06
this is the back side of the mount.		here is the stablizer back installed with new poly end bushings. looks mush better.
Hits: 509
Size: 83.51 KB
Posted: 10/27/06
here is the stablizer back installed with new poly end bushings. looks mush better.		Here is the other end. i added new poly bushings here too and a new boot. i re aligned the mount on...
Hits: 485
Size: 74.34 KB
Posted: 10/27/06
Here is the other end. i added new poly bushings here too and a new boot. i re aligned the mount on...
Here is a shot from a few feet back. looks and works great.
Hits: 558
Size: 83.77 KB
Posted: 10/27/06
Here is a shot from a few feet back. looks and works great.		here it is ll done. Much stronger and ready to goto work.
Hits: 565
Size: 106.26 KB
Posted: 11/1/06
here it is ll done. Much stronger and ready to goto work.		here it is all done.
Hits: 565
Size: 110.91 KB
Posted: 11/7/06
here it is all done.		  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog