michael collins > 1983 Ford Bronco > open folder Ball Joints

Here is the drivers side ball joint replacement. Here we are with the wheel in place.
Hits: 446
Size: 76.4 KB
Posted: 10/27/06
Here is the drivers side ball joint replacement. Here we are with the wheel in place.		Ok the wheel is off. I was lazy here please put a Jack stand under the frame or front axle do not wo...
Hits: 413
Size: 79.78 KB
Posted: 10/27/06
Ok the wheel is off. I was lazy here please put a Jack stand under the frame or front axle do not wo...		Remove the caliper (do not just let it hang. i got a set of "S" hooks and these work well here)
Hits: 396
Size: 91.61 KB
Posted: 10/27/06
Remove the caliper (do not just let it hang. i got a set of "S" hooks and these work well here)		Now the lock outs are off.
Hits: 459
Size: 86.91 KB
Posted: 10/27/06
Now the lock outs are off.		ok now the hub and rotor assembly are off.
Hits: 467
Size: 90.71 KB
Posted: 10/27/06
ok now the hub and rotor assembly are off.
now the dust shield and spindel assemble are removed.
Hits: 493
Size: 89.61 KB
Posted: 10/27/06
now the dust shield and spindel assemble are removed.		Here it is without the spindal
Hits: 434
Size: 90.26 KB
Posted: 11/3/06
Here it is without the spindal		ok now the axle and then the knuckle is removed.
Hits: 448
Size: 79.79 KB
Posted: 10/27/06
ok now the axle and then the knuckle is removed.		here is the knuckle assembly ready to press out the ball jints. I ran into an issue the C-press was...
Hits: 552
Size: 87.76 KB
Posted: 10/27/06
here is the knuckle assembly ready to press out the ball jints. I ran into an issue the C-press was...		Here is the steering stop for the pass side knuckle.
Hits: 435
Size: 40.63 KB
Posted: 10/27/06
Here is the steering stop for the pass side knuckle.
Here is the bent knuckle. well off to the junk yard as it is sunday and no one has a new one. i foun...
Hits: 410
Size: 71.83 KB
Posted: 10/27/06
Here is the bent knuckle. well off to the junk yard as it is sunday and no one has a new one. i foun...		Ok i got back from the junk yard and the ball joints seemed ok, but i had new ones sitting onthe ben...
Hits: 454
Size: 84.56 KB
Posted: 10/27/06
Ok i got back from the junk yard and the ball joints seemed ok, but i had new ones sitting onthe ben...		well as i said i did the pass side ball joints with the c press but this side did not want to work w...
Hits: 461
Size: 76.58 KB
Posted: 10/27/06
well as i said i did the pass side ball joints with the c press but this side did not want to work w...		Here are the old Ball joints.
Hits: 479
Size: 72.17 KB
Posted: 10/27/06
Here are the old Ball joints.		Here are the new Ball joints. i now got all 4 replaced.
Hits: 496
Size: 67.92 KB
Posted: 10/27/06
Here are the new Ball joints. i now got all 4 replaced.
Here is the new lower ball joint in place. the new press just poped it right in.
Hits: 438
Size: 74.18 KB
Posted: 10/27/06
Here is the new lower ball joint in place. the new press just poped it right in.		I did not do the ball joints at the same time. i did the pass side and then the drivers side. here w...
Hits: 475
Size: 74.14 KB
Posted: 11/9/06
I did not do the ball joints at the same time. i did the pass side and then the drivers side. here w...		here is a better shot od the completed pass side ball joints.
Hits: 441
Size: 103.5 KB
Posted: 11/9/06
here is a better shot od the completed pass side ball joints.		  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog