michael collins > 1983 Ford Bronco > open folder SwayBar

This is the drop for the swaybar. this keeps all aligned correctly after the lift.
Hits: 615
Size: 105.46 KB
Posted: 11/1/06
This is the drop for the swaybar. this keeps all aligned correctly after the lift.		i wanted to replace the worn out rubber bushings so out the dog bones came and i drilled out the old...
Hits: 593
Size: 95.37 KB
Posted: 11/7/06
i wanted to replace the worn out rubber bushings so out the dog bones came and i drilled out the old...		I drilled out all the ruber bushings on both swaybar links.
Hits: 609
Size: 99.44 KB
Posted: 11/7/06
I drilled out all the ruber bushings on both swaybar links.		Here is the drop mount painted and ready for re-install.
Hits: 593
Size: 82.97 KB
Posted: 11/7/06
Here is the drop mount painted and ready for re-install.		I did not like the way the swaybar was hanging out in the front and it was binding some. so most say...
Hits: 546
Size: 92.87 KB
Posted: 10/27/06
I did not like the way the swaybar was hanging out in the front and it was binding some. so most say...
Here is the 2 " drop mount for the swaybar. this was part of the the 4" lift kit that was already in...
Hits: 568
Size: 93.82 KB
Posted: 11/7/06
Here is the 2 " drop mount for the swaybar. this was part of the the 4" lift kit that was already in...		here is the mount painted and installed
Hits: 529
Size: 102.64 KB
Posted: 11/7/06
here is the mount painted and installed		here are the dog bones installed. this did tighen the front end alittle.
Hits: 689
Size: 103.84 KB
Posted: 11/7/06
here are the dog bones installed. this did tighen the front end alittle.		here it is all done.
Hits: 562
Size: 109.78 KB
Posted: 11/7/06
here it is all done.		On the right is the stock bronco dog bones. they would be in the way of a knuckle under that i plan ...
Hits: 678
Size: 38.71 KB
Posted: 10/27/06
On the right is the stock bronco dog bones. they would be in the way of a knuckle under that i plan ...
I swapped the rubber bushings for the polly ones i put in the stock dog bones. i then went to OSH an...
Hits: 505
Size: 67.4 KB
Posted: 10/27/06
I swapped the rubber bushings for the polly ones i put in the stock dog bones. i then went to OSH an...		Here is the drivers side setup just like the pass side. this was all done for $10
Hits: 577
Size: 83.07 KB
Posted: 10/27/06
Here is the drivers side setup just like the pass side. this was all done for $10		since i had longer links i wanted to remount the swaybar front. i was able to toss the 2" drop mount...
Hits: 545
Size: 72.69 KB
Posted: 10/27/06
since i had longer links i wanted to remount the swaybar front. i was able to toss the 2" drop mount...		  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog