|
|
Hits: 474
Size: 82.37 KB
Posted: 10/30/06
Here is how she all started out. | 
Hits: 462
Size: 94.68 KB
Posted: 10/30/06
Here is the rear brakes as i got the beast. the drums were over spraied with the rim color. they had... | 
Hits: 478
Size: 63.77 KB
Posted: 10/30/06
Here is the drivers side old brake system | 
Hits: 457
Size: 91.91 KB
Posted: 10/30/06
Here is the drivers side brake system as i started this repair. | 
Hits: 413
Size: 93.48 KB
Posted: 10/30/06
Here it all stripped down ready to be pulled out anf get regeared and new paint and brakes. |
Hits: 467
Size: 99.89 KB
Posted: 10/30/06
I stripped all the brake parts off. i found the backing plates were torn up and needed to be replace... | 
Hits: 489
Size: 79.14 KB
Posted: 10/30/06
Here is the driver side all torn down. | 
Hits: 488
Size: 72.47 KB
Posted: 10/30/06
Here is the all new brake system. new shoes, drums, springs and hardware. | 
Hits: 505
Size: 77.45 KB
Posted: 10/30/06
Here is the rear brakes all installed and looking new. | 
Hits: 533
Size: 77.88 KB
Posted: 10/30/06
Here is another view of the new rear brakes. |
Hits: 498
Size: 69.69 KB
Posted: 10/30/06
Here it is all completed with the new drums installed | 
Hits: 406
Size: 89.52 KB
Posted: 10/30/06
with the brake and drums being new i decided it was time to replace and upgrade the brake lines. i t... | 
Hits: 466
Size: 96.62 KB
Posted: 10/30/06
Here is the new lines and adapters i got to conver the rear brakes to braided lines. | 
Hits: 449
Size: 95.82 KB
Posted: 10/30/06
This is both new axle lines and the adapters. | 
Hits: 435
Size: 77.56 KB
Posted: 10/30/06
here is the rear flex line the stock on the bottom and the new on th top. |
Hits: 474
Size: 101.61 KB
Posted: 10/30/06
Here is another view of the old and the new lines. | 
Hits: 434
Size: 56.19 KB
Posted: 10/30/06
the flex line went right in place of the stock rubber line. the axle vent goes thru the bottom of th... | 
Hits: 462
Size: 80.26 KB
Posted: 10/30/06
here you can see where the line connects to the frame. it is the same line as the stock rubber line. | 
Hits: 454
Size: 92.32 KB
Posted: 10/30/06
to instal the braided lines i added the adapters to the disti block. these are AN adapters. | 
Hits: 452
Size: 101.19 KB
Posted: 10/30/06
here is the disti block ready to get the new lines. |
Hits: 444
Size: 88.27 KB
Posted: 10/30/06
i added the AN adapter to the wheel cylinder on the drivers side. | 
Hits: 423
Size: 90.05 KB
Posted: 10/30/06
here is the AN adapter on the pass side wheel cylinder. | 
Hits: 457
Size: 85.63 KB
Posted: 10/30/06
i got the lines longer than i thought and i went over the spring and connected the wheel to the dist... | 
Hits: 433
Size: 85.67 KB
Posted: 10/30/06
here is another view of the drivers side. | 
Hits: 461
Size: 43.19 KB
Posted: 10/30/06
Here is the brake lines all completed. the pedal feels so much better. |
Hits: 425
Size: 103.46 KB
Posted: 10/30/06
This turned out real good and was an easy upgrade. | 
Hits: 429
Size: 79.31 KB
Posted: 10/30/06
Here is the rear brake line going over the top of the center housing. | 
Hits: 452
Size: 93.29 KB
Posted: 10/30/06
here is the line to the pass side wheel. | 
Hits: 444
Size: 69.45 KB
Posted: 10/30/06
I was going to add new tabs to hold the lines but now there is going to be an axle swap somewhere so... | |
Brakes