michael collins > 1983 Ford Bronco > open folder 3G Alternator Swap

I fount out my pretty alt was not working correctly. I ben reading on a 3G 130 amp swap. so off to t...
Url
Tag
Img
Thumb
This is the Tempo alt not what you want fof the swap. the plugs are the same as the correct one.
Url
Tag
Img
Thumb
WRONG ALT THIS IS A TEMPO see the mounts are in the wrong spot.
Url
Tag
Img
Thumb
Here is the Back of the TEMPO alt. I decided i going to turn this into a welding alt. the mount will...
Url
Tag
Img
Thumb
This is a TEMPO alt not a direct swap for a bronco or F150
Url
Tag
Img
Thumb
Well another trip the the yard and i got this correct alt off a Taruas. At this time the pullies are...
Url
Tag
Img
Thumb
here is another view before i swapped the pullies.
Url
Tag
Img
Thumb
after i returned from the auto store here they are correct pullies on the correct alt.
Url
Tag
Img
Thumb
Here is a front view. of both 3Gs
Url
Tag
Img
Thumb
Here is the back. they are both the same connections minus the mounting ears.
Url
Tag
Img
Thumb
This was taken from another web site, sorry not sure whom i stole this from but thank you. this is t...
Url
Tag
Img
Thumb
This is for the people swapping the later 2G in thier truck. this 2G has on the side. i was helping ...
Url
Tag
Img
Thumb
on my year i get to toss all this in the trash the regulator is now built in the alt and much cleane...
Url
Tag
Img
Thumb
Here is Jezebel wiring mess. you can see the regulator and all the wires that goto it.
Url
Tag
Img
Thumb
I get to toss most of these into the trash it is a fire waiting to start....
Url
Tag
Img
Thumb
Here is another view of the mess i going to remove.
Url
Tag
Img
Thumb
there are a couple was to do the wiring. you can lookup Fireguy and his website and order everything...
Url
Tag
Img
Thumb
Here is the harness that was on the 3G. i just cut it longer at the junk Yard.
Url
Tag
Img
Thumb
here is another view of stock harness.
Url
Tag
Img
Thumb
Here is my home made harness. i tossed a couple of the wires in the stock harness. the new uses 3 wi...
Url
Tag
Img
Thumb
Here the harness is all connected and ready for install. the wire not connected it the IGN hot or on...
Url
Tag
Img
Thumb
Ok-next issue when pulling a higher amp output you need to increase the charge cables. i wouls sugge...
Url
Tag
Img
Thumb
how this circuit breaker works when it gets tripped the lever pops out in the center. you just fix t...
Url
Tag
Img
Thumb
Here are all the new wires. i planning on adding a second battery with the selector switc so i took ...
Url
Tag
Img
Thumb
Here is the connection for the battery.
Url
Tag
Img
Thumb
I wanted to have a power panel i could pull off fast if or when i need to replace the fender. I got ...
Url
Tag
Img
Thumb
Here i have added the circuit breaker.
Url
Tag
Img
Thumb
Now i am ready to start wiring this thing this is from the BAT+ alt post to the circuit breaker then...
Url
Tag
Img
Thumb
on the 4.9 the bottom alt bracket was a adjustable bar i install the alt like the 2G was installed. ...
Url
Tag
Img
Thumb
Here is a different view of the alt installed.
Url
Tag
Img
Thumb
Here are all the wires connected. the plug on the bottom that is open right now is the power bypass ...
Url
Tag
Img
Thumb
another view of the battery and panel connections.
Url
Tag
Img
Thumb
i decided to chop out the connector and wire directly to a battery plus connection. you can see it o...
Url
Tag
Img
Thumb
Last look at the battery connection. like the hold down?
Url
Tag
Img
Thumb
 
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog