michael collins > 1983 Ford Bronco > open folder License Plate light

well the law said i needed license plate lights so i went and got these LED units. (they are blue)
Hits: 393
Size: 93.46 KB
Posted: 11/3/06
well the law said i needed license plate lights so i went and got these LED units. (they are blue)		This was going to be a simple install. here is the plate mount
Hits: 467
Size: 87.72 KB
Posted: 11/3/06
This was going to be a simple install. here is the plate mount		Now the top bolts are out.
Hits: 452
Size: 87.37 KB
Posted: 11/3/06
Now the top bolts are out.		I then put the LED bolts in the holes wires first.
Hits: 420
Size: 89.85 KB
Posted: 11/3/06
I then put the LED bolts in the holes wires first.		I then put the nuts and washers on the LED. you can see the LED wires hanging in the back of the bum...
Hits: 425
Size: 80.92 KB
Posted: 11/3/06
I then put the nuts and washers on the LED. you can see the LED wires hanging in the back of the bum...
It is hard to see but i soldered and heat shrinked all the wire connections.
Hits: 443
Size: 69.73 KB
Posted: 11/3/06
It is hard to see but i soldered and heat shrinked all the wire connections.		I wired the POS and neg on the LEDs together.
Hits: 471
Size: 79.4 KB
Posted: 11/3/06
I wired the POS and neg on the LEDs together.		I just tied them into the back ground and running light hot. I then heat shrinked the connection to ...
Hits: 417
Size: 79.9 KB
Posted: 11/3/06
I just tied them into the back ground and running light hot. I then heat shrinked the connection to ...		Here was the final connection all weather protected.
Hits: 442
Size: 81.07 KB
Posted: 11/3/06
Here was the final connection all weather protected.		Here is the final install. these are bright and use little power. i think they will work great.
Hits: 418
Size: 76.77 KB
Posted: 11/3/06
Here is the final install. these are bright and use little power. i think they will work great.
Another view of the LEDs installed
Hits: 428
Size: 79.23 KB
Posted: 11/3/06
Another view of the LEDs installed		here it the plate alittle bit down the street. (Matts stock bronco to the left of mine).
Hits: 419
Size: 77.55 KB
Posted: 11/3/06
here it the plate alittle bit down the street. (Matts stock bronco to the left of mine).		Here is the final assembly. The CHP signed off on the fix it ticket.
Hits: 418
Size: 52.95 KB
Posted: 10/31/06
Here is the final assembly. The CHP signed off on the fix it ticket.		Here is a side view of the new mount and light.
Hits: 384
Size: 68.96 KB
Posted: 10/31/06
Here is a side view of the new mount and light.		Here is the new light setup as i finnished it.
Hits: 399
Size: 58.59 KB
Posted: 11/3/06
Here is the new light setup as i finnished it.
Here it is lit up at night. this project is now completed.
Hits: 395
Size: 13.21 KB
Posted: 10/31/06
Here it is lit up at night. this project is now completed.		    
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog