michael collins > 1983 Ford Bronco > open folder License Plate light

well the law said i needed license plate lights so i went and got these LED units. (they are blue)
Url
Tag
Img
Thumb
This was going to be a simple install. here is the plate mount
Url
Tag
Img
Thumb
Now the top bolts are out.
Url
Tag
Img
Thumb
I then put the LED bolts in the holes wires first.
Url
Tag
Img
Thumb
I then put the nuts and washers on the LED. you can see the LED wires hanging in the back of the bum...
Url
Tag
Img
Thumb
It is hard to see but i soldered and heat shrinked all the wire connections.
Url
Tag
Img
Thumb
I wired the POS and neg on the LEDs together.
Url
Tag
Img
Thumb
I just tied them into the back ground and running light hot. I then heat shrinked the connection to ...
Url
Tag
Img
Thumb
Here was the final connection all weather protected.
Url
Tag
Img
Thumb
Here is the final install. these are bright and use little power. i think they will work great.
Url
Tag
Img
Thumb
Another view of the LEDs installed
Url
Tag
Img
Thumb
here it the plate alittle bit down the street. (Matts stock bronco to the left of mine).
Url
Tag
Img
Thumb
Here is the final assembly. The CHP signed off on the fix it ticket.
Url
Tag
Img
Thumb
Here is a side view of the new mount and light.
Url
Tag
Img
Thumb
Here is the new light setup as i finnished it.
Url
Tag
Img
Thumb
Here it is lit up at night. this project is now completed.
Url
Tag
Img
Thumb
    
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog