After the shackle flip the exhaust pipe was almost sitting on the rear springs. here it is before i modified it.

here is the rear view. it has 1/2 clearence.

here is a closer view.

I tried to full sweep the suspension and i was still worried it might hit the spring.

here is the new location of the rear exhaust hanger. you can see whaere the old mount was.

another view of the old and new mounting location.

I moved the exhaust hanger to a different spot and bent the pipe some. this was good enough for now.

This was with the new hanger and a fast bend in the pipe.

Well after going to the smog shop (It failed High hydrocarbons) i was told to swap out the cat. here is the new cat.

Here is a side view. the stuff in the center reacts with the exhaust and makes it run cleaner.

i had Marcco muffler install the cat and fix the tail pipe. this is much better.

Here she is after the relocate. much better.

Here is the new temp exhauts mount. it is the stock mount just moved up and forward to clear the spring.

After moving the mount up gave alot more room between the spring and pipe.

Here is the head pipe and old cat.

here is the stock muffler.