Here is the driver side as i started. These are superlift 4" lift springs.

here is another view of the way she looked when i started.

Here is the starting point. 40" at the start.

another shot of the starting point. 40 inches from the ground.

Here is the 40 inches from ground on the pass side at the start.

Here is the pass side at the start

The swap is sorta easy and fast. i removed the top of the shock and the top coil keeper and the bottom 1 1/8 nut on the retainer. i then dropped the jack and removed the coil.

Here is the new coil in the pass side and bolted in. i still need to secure the shock.

Here is the driver side spring out.

Here is the driver side all completed.

Here are the old coils. still in good shape.

Here are the new springs fresh off ebay.

here is the new coils. all shinny and rear to goto work.

here is the drivers side spring with the new spring.

here is the pass side new and old spring.

Here she is ready to got for the front end alignment.

She now sitting alot more level.

She is looking great. no more jacked up rear end...

She is all done for now.

i got her leveled but now the wheels look like \---------/ not |----------| the ttb mounts wer only for 4" not the 6" i got now. well new mount time.

Final measure after the springs were installed....almost 43 inches on the drivers side.

if i remove the swaybar i get almost 45 inches. i think i need to look into this issue.