michael collins > 1983 Ford Bronco > open folder Springs

Here is the driver side as i started. These are superlift 4" lift springs.
Url
Tag
Img
Thumb
here is another view of the way she looked when i started.
Url
Tag
Img
Thumb
Here is the starting point. 40" at the start.
Url
Tag
Img
Thumb
another shot of the starting point. 40 inches from the ground.
Url
Tag
Img
Thumb
Here is the 40 inches from ground on the pass side at the start.
Url
Tag
Img
Thumb
Here is the pass side at the start
Url
Tag
Img
Thumb
The swap is sorta easy and fast. i removed the top of the shock and the top coil keeper and the bott...
Url
Tag
Img
Thumb
Here is the new coil in the pass side and bolted in. i still need to secure the shock.
Url
Tag
Img
Thumb
Here is the driver side spring out.
Url
Tag
Img
Thumb
Here is the driver side all completed.
Url
Tag
Img
Thumb
Here are the old coils. still in good shape.
Url
Tag
Img
Thumb
Here are the new springs fresh off ebay.
Url
Tag
Img
Thumb
here is the new coils. all shinny and rear to goto work.
Url
Tag
Img
Thumb
here is the drivers side spring with the new spring.
Url
Tag
Img
Thumb
here is the pass side new and old spring.
Url
Tag
Img
Thumb
Here she is ready to got for the front end alignment.
Url
Tag
Img
Thumb
She now sitting alot more level.
Url
Tag
Img
Thumb
She is looking great. no more jacked up rear end...
Url
Tag
Img
Thumb
She is all done for now.
Url
Tag
Img
Thumb
i got her leveled but now the wheels look like \---------/ not |----------| the ttb mounts wer only ...
Url
Tag
Img
Thumb
Final measure after the springs were installed....almost 43 inches on the drivers side.
Url
Tag
Img
Thumb
if i remove the swaybar i get almost 45 inches. i think i need to look into this issue.
Url
Tag
Img
Thumb
   
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog