here is the donor truck. a 1992 F150 custom truck. theis truck was rear ended and demed a full loss....
Hits: 408
Size: 94.12 KB
Posted: 11/4/06
here is the donor truck. a 1992 F150 custom truck. theis truck was rear ended and demed a full loss....
here is another view of the pass side front. the only front metal left is the pass side fender.
Hits: 633
Size: 89.97 KB
Posted: 11/4/06
here is another view of the pass side front. the only front metal left is the pass side fender.
here is a view under the front end.
Hits: 438
Size: 71.59 KB
Posted: 11/4/06
here is a view under the front end.
here is the drive shaft and mid section of the truck.
Hits: 432
Size: 91.99 KB
Posted: 11/4/06
here is the drive shaft and mid section of the truck.
here is a shot of the inside. not too bad shape.
Hits: 459
Size: 73.85 KB
Posted: 11/4/06
here is a shot of the inside. not too bad shape.
here is the pass side door panel.
Hits: 441
Size: 74.25 KB
Posted: 11/4/06
here is the pass side door panel.
ok why i got this? well she was hit hard in the rear end. how hard look at the rear leaf spring and ...
Hits: 587
Size: 98.08 KB
Posted: 11/4/06
ok why i got this? well she was hit hard in the rear end. how hard look at the rear leaf spring and ...
is this what they call rearching the spring? it was fun towing this back home.
Hits: 596
Size: 92.8 KB
Posted: 11/4/06
is this what they call rearching the spring? it was fun towing this back home.
the hit tore the shackle and bent the leaf spring and this is the back end of the spring.
Hits: 603
Size: 67.18 KB
Posted: 11/4/06
the hit tore the shackle and bent the leaf spring and this is the back end of the spring.
here is another look at the rear shackle.
Hits: 440
Size: 65.67 KB
Posted: 11/4/06
here is another look at the rear shackle.
here is a view of the pass side of the motor. you can see the dual exhaust manifolds.
Hits: 411
Size: 78.81 KB
Posted: 11/4/06
here is a view of the pass side of the motor. you can see the dual exhaust manifolds.
here is the top of the pass side motor.
Hits: 393
Size: 91.05 KB
Posted: 11/4/06
here is the top of the pass side motor.
here is the drivers side of the motor.
Hits: 400
Size: 95.76 KB
Posted: 11/4/06
here is the drivers side of the motor.
here is the hydrolic clutch master cylinder. i not sure if i going to use it but it might go with th...
Hits: 421
Size: 89.52 KB
Posted: 11/4/06
here is the hydrolic clutch master cylinder. i not sure if i going to use it but it might go with th...
Here is the front of the efi motor. i going to redo my 3G swap and start the signaw power steering s...
Hits: 442
Size: 100.68 KB
Posted: 11/4/06
Here is the front of the efi motor. i going to redo my 3G swap and start the signaw power steering s...
Here is another shot with the front end as i parked it from the tow home
Hits: 560
Size: 96.54 KB
Posted: 11/4/06
Here is another shot with the front end as i parked it from the tow home
here is the main wire harness for the computer. i going to have to sort it out and seperate what i n...
Hits: 448
Size: 103.83 KB
Posted: 11/4/06
here is the main wire harness for the computer. i going to have to sort it out and seperate what i n...
here is another view of the wiring mess i going to have to sort thru. top left is the main wireing h...
Hits: 411
Size: 96.97 KB
Posted: 11/4/06
here is another view of the wiring mess i going to have to sort thru. top left is the main wireing h...
here is the last shot of the drivers side harness mess. now it is time to start to remove stuff.
Hits: 448
Size: 96.78 KB
Posted: 11/4/06
here is the last shot of the drivers side harness mess. now it is time to start to remove stuff.
ok the next cycle is completd. the heaterbox is gone.
Hits: 434
Size: 99.08 KB
Posted: 11/5/06
ok the next cycle is completd. the heaterbox is gone.
here the F150 is missing the computer and the main wire harness.
Hits: 544
Size: 103.08 KB
Posted: 11/5/06
here the F150 is missing the computer and the main wire harness.
now the motor is ready for a fast rinse off. the fender is off too now
Hits: 433
Size: 96.08 KB
Posted: 11/5/06
now the motor is ready for a fast rinse off. the fender is off too now
here is the pass side of the motor before the wash up.
Hits: 402
Size: 89.88 KB
Posted: 11/5/06
here is the pass side of the motor before the wash up.
here is the driver side before the bath.
Hits: 571
Size: 97.04 KB
Posted: 11/5/06
here is the driver side before the bath.
here it is after the bath. i just wanted to get the loose stuff off.
Hits: 431
Size: 99.15 KB
Posted: 11/5/06
here it is after the bath. i just wanted to get the loose stuff off.
here is the driver side after its bath.
Hits: 434
Size: 100.91 KB
Posted: 11/5/06
here is the driver side after its bath.
here she is out of the truck and on the stand
Hits: 641
Size: 89.52 KB
Posted: 11/5/06
here she is out of the truck and on the stand
here is the front view still dirty.
Hits: 580
Size: 86.7 KB
Posted: 11/5/06
here is the front view still dirty.
ok after a good soap and pressure wash she is looking better. i think i am going to do one more clea...
Hits: 468
Size: 102.75 KB
Posted: 11/5/06
ok after a good soap and pressure wash she is looking better. i think i am going to do one more clea...
the front of the motor looks better now too. i still think it needs another good soap up too.
Hits: 383
Size: 98.57 KB
Posted: 11/5/06
the front of the motor looks better now too. i still think it needs another good soap up too.
here is a shot of the truck without the motor.
Hits: 656
Size: 102.04 KB
Posted: 11/5/06
here is a shot of the truck without the motor.
here is a head on view with the motor out.
Hits: 615
Size: 94.87 KB
Posted: 11/5/06
here is a head on view with the motor out.
here is the tranny out.
Hits: 597
Size: 94.16 KB
Posted: 11/5/06
here is the tranny out.
here is the drivers side after a fast wash.
Hits: 480
Size: 95.94 KB
Posted: 11/5/06
here is the drivers side after a fast wash.
here is the pass side of the tranny.
Hits: 416
Size: 93.6 KB
Posted: 11/5/06
here is the pass side of the tranny.
well this was at noon. we had the cab and most of the truck stripped down. here is my oldest son rem...
Hits: 595
Size: 95.35 KB
Posted: 11/11/06
well this was at noon. we had the cab and most of the truck stripped down. here is my oldest son rem...
Well after some grinding and cussing the bed gave up and came off. into the paper it goes.
Hits: 587
Size: 98.74 KB
Posted: 11/11/06
Well after some grinding and cussing the bed gave up and came off. into the paper it goes.
Here is another view of the bed. very little damage to the pass side rear end.
Hits: 409
Size: 83.77 KB
Posted: 11/11/06
Here is another view of the bed. very little damage to the pass side rear end.
Here is the cab off the frame waiting to be installed in a rock crawler project.
Hits: 610
Size: 94.9 KB
Posted: 11/11/06
Here is the cab off the frame waiting to be installed in a rock crawler project.
well at the end of our day here is the front end.
Hits: 462
Size: 87.12 KB
Posted: 11/11/06
well at the end of our day here is the front end.
here is the frame stripped shot
Hits: 567
Size: 93.17 KB
Posted: 11/11/06
here is the frame stripped shot
here is view of the rear end. you can see whaere the spring hanger tore and the spring and tire gave...
Hits: 453
Size: 94.53 KB
Posted: 11/11/06
here is view of the rear end. you can see whaere the spring hanger tore and the spring and tire gave...
here is a close up of the rear end with nothing else on it.
Hits: 454
Size: 88.32 KB
Posted: 11/11/06
here is a close up of the rear end with nothing else on it.
so at the end of the day we have an almost rolling frame and these parts (most going to the paper af...
Hits: 657
Size: 94.39 KB
Posted: 11/11/06
so at the end of the day we have an almost rolling frame and these parts (most going to the paper af...
there is a ton of wiring for a stock 1/2 ton truck....lol i got to sort thru and get all that is nee...
Hits: 671
Size: 109.54 KB
Posted: 11/11/06
there is a ton of wiring for a stock 1/2 ton truck....lol i got to sort thru and get all that is nee...
ok the rear fuel tank is out now. Time to make the frame disapear
Hits: 622
Size: 106.14 KB
Posted: 11/14/06
ok the rear fuel tank is out now. Time to make the frame disapear
here is the F150 rear tank. too small for the bronco but will work as a temp tank if needed.
Hits: 453
Size: 87.06 KB
Posted: 11/14/06
here is the F150 rear tank. too small for the bronco but will work as a temp tank if needed.
now the rear part is chopped and the axle is now free from the frame.
Hits: 590
Size: 98.7 KB
Posted: 11/14/06
now the rear part is chopped and the axle is now free from the frame.
now the frame is chopped the the rear truck cab mount.This is going with the cab for a rock crawler.
Hits: 569
Size: 103.96 KB
Posted: 11/14/06
now the frame is chopped the the rear truck cab mount.This is going with the cab for a rock crawler.
almost down to the front end.
Hits: 548
Size: 88.15 KB
Posted: 11/14/06
almost down to the front end.
here is the front rear spring hangers i remove the rivets and sell for a shackle flip.
Hits: 637
Size: 88.45 KB
Posted: 11/14/06
here is the front rear spring hangers i remove the rivets and sell for a shackle flip.
here is the 8.8 rear end. going to be parted out. it got 2.73 gears and open carrier.
Hits: 650
Size: 78.69 KB
Posted: 11/14/06
here is the 8.8 rear end. going to be parted out. it got 2.73 gears and open carrier.
here s the front end ready to part down.
Hits: 574
Size: 84.59 KB
Posted: 11/14/06
here s the front end ready to part down.
here is the pile going to scrap
Hits: 650
Size: 100.04 KB
Posted: 11/14/06
here is the pile going to scrap
scrap pile getting bigger.
Hits: 448
Size: 87.57 KB
Posted: 11/14/06
scrap pile getting bigger.
i love the plasma cutter. here is the pile at the end of the night.
Hits: 448
Size: 93.3 KB
Posted: 11/14/06
i love the plasma cutter. here is the pile at the end of the night.
here is the cab off the frame and stripped down.
Hits: 428
Size: 87.58 KB
Posted: 12/23/06
here is the cab off the frame and stripped down.
another view of just the cab
Hits: 410
Size: 96.02 KB
Posted: 12/23/06
another view of just the cab
last picture of the cab.
Hits: 399
Size: 91.75 KB
Posted: 12/23/06
last picture of the cab.
here is the last pile of scrap
Hits: 419
Size: 97.39 KB
Posted: 12/24/06
here is the last pile of scrap
another view
Hits: 447
Size: 86.9 KB
Posted: 12/24/06
another view
the last view of the cab and the other parts.
Hits: 442
Size: 95.3 KB
Posted: 12/24/06
the last view of the cab and the other parts.
here is the side or saddle tank. it is not needed and i sold it to get other things i needed.
Hits: 431
Size: 51.54 KB
Posted: 2/27/07
here is the side or saddle tank. it is not needed and i sold it to get other things i needed.
  

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog