michael collins > 1983 Ford Bronco > open folder EEC Install

i been working on the EEC and wire harness placement. I going to try and be as close the the stock 1...
Url
Tag
Img
Thumb
another before view
Url
Tag
Img
Thumb
this is the space the EEC should fit in.
Url
Tag
Img
Thumb
this is where the new harness will come thru (I hope). the wire harness on the bottom was for the Hi...
Url
Tag
Img
Thumb
this is the end of the high alt harness.
Url
Tag
Img
Thumb
this is the motor side of the firewall where the EEC and harness will go. you can see the high alt h...
Url
Tag
Img
Thumb
the 2 rusty nuts are the ebrake mount to the right of this is where the EEC will go.
Url
Tag
Img
Thumb
this is the speedo cable and firewall shot
Url
Tag
Img
Thumb
here is another view of the harness and EEC before shot.
Url
Tag
Img
Thumb
here is one last look at the fire wall bafor any work was done.
Url
Tag
Img
Thumb
here is the inside where the computer and harness connectors will go.
Url
Tag
Img
Thumb
here is the EEC pocket. there is a seam running at an angle in the back of the pocket but that will ...
Url
Tag
Img
Thumb
this is the EEC mount i made a template to get the correct spacing and hole size.
Url
Tag
Img
Thumb
this was one reason i changed the front cowl as it allows alot of leaves and dirt in the cowls and r...
Url
Tag
Img
Thumb
i vaccumed out the leaves and dirt. thius should not be an issue any more. you can see the junk.
Url
Tag
Img
Thumb
after some measuring and carefull cutting i got the computer mount and computer installed. it looks ...
Url
Tag
Img
Thumb
here is under the hood with the gasket in place. i covered the connection point to keep out dirt. lo...
Url
Tag
Img
Thumb
   
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog