|
|
Hits: 507
Size: 52.21 KB
Posted: 3/9/07
this is the stock p/s pump | 
Hits: 535
Size: 46.27 KB
Posted: 3/9/07
here is the side shot of the stock pump. | 
Hits: 614
Size: 59.68 KB
Posted: 3/12/07
after removing the pulley and the 3 bolts the P/S pump came right off. | 
Hits: 538
Size: 74.68 KB
Posted: 3/12/07
here is the front of the bracket withthe P/s removed. it looks like i have to get a different bracke... | 
Hits: 615
Size: 57.14 KB
Posted: 3/16/07
as i was removing the AC compressor from the old mount i found they used a couple spacers. i found o... |
Hits: 580
Size: 50.57 KB
Posted: 3/16/07
here is the bottom spacer. | 
Hits: 568
Size: 64.43 KB
Posted: 3/16/07
here is the old mount there is 2 bolts on the top and two bolts and two nuts on the bottom | 
Hits: 612
Size: 70.37 KB
Posted: 3/16/07
here is the motor with the bracket removed. i need to clean the motor some more.. | 
Hits: 532
Size: 78.81 KB
Posted: 3/16/07
Here is the front of the motor no bracket.
| 
Hits: 630
Size: 64.58 KB
Posted: 3/16/07
here is the old mount off of the motor. |
Hits: 564
Size: 59.82 KB
Posted: 3/16/07
well i went to 6 different junk yards and found only one van with a 4.9 the rest had V-8s. i got the... | 
Hits: 608
Size: 55.52 KB
Posted: 3/16/07
here is the new pump it is an oilly mess right now. | 
Hits: 608
Size: 59.61 KB
Posted: 3/16/07
here is the other side of the new pump. | 
Hits: 576
Size: 78.81 KB
Posted: 3/16/07
i washed the motor down again and here is a shot before the new mbrackets goes on. | 
Hits: 609
Size: 73.19 KB
Posted: 3/16/07
the new mount is in place and the old AC compressor and spacers are installed. |
Hits: 521
Size: 67.42 KB
Posted: 3/16/07
here is a side view of the new mount and AC compressor installed. | 
Hits: 560
Size: 70.48 KB
Posted: 3/16/07
here is the new P/S pump in place. this stuff cleaned up real good. | 
Hits: 510
Size: 60.58 KB
Posted: 3/16/07
a side view of the new pump installed. | 
Hits: 656
Size: 72.85 KB
Posted: 3/16/07
i then installed the serp belt pulley. | 
Hits: 692
Size: 72.86 KB
Posted: 3/16/07
I then removed the old hose ends and all that is needed is a new pressure hose for E150 van and a n... |
Hits: 629
Size: 75.16 KB
Posted: 3/20/07
the motor is now ready to go in the bronco. the 3G is the smaller one for now. the P/S pump swap is ... | 
Hits: 536
Size: 44.46 KB
Posted: 7/3/07
ok next step i went to NAPA and got the return line Part number 7-1899 and the pressure line (from a... | 
Hits: 482
Size: 51.99 KB
Posted: 7/3/07
Here are the parts out of the box and ready to go on Jezebel | | |
Sagnaw Power steering swap