Here is the stock 2G off the motor. it used the 10-2 bolt mount.

Here is the back of the 1992 stock 2G alt.

I did a 3G swap on the old motor andi wanted to carry it over to the new motor. There was a 2G alt on the motor so here is the new motor withthe 2G off.

Here is the other side of the stock mount. I am swapping the V-Belt pulley for the serp pulley then it is a bolt in.

here are both versions of the 3G i swapped the pullies but the alt needed to be clocked some to allow better wire connections.

i installed the 95 amp 3G for now i will swap it out latter for the bigger one. it is still better than the 65 amp 2G