|
|
Hits: 532
Size: 80.42 KB
Posted: 3/20/07
now is the time to pull out the old 4.9. here is the way she looked as i started. | 
Hits: 414
Size: 56.19 KB
Posted: 3/20/07
here is another view | 
Hits: 518
Size: 81.02 KB
Posted: 3/20/07
another view of before. | 
Hits: 479
Size: 85.37 KB
Posted: 3/20/07
this is the last of how it was. | 
Hits: 389
Size: 77.75 KB
Posted: 7/4/07
next in motor removal |
Hits: 397
Size: 76.5 KB
Posted: 7/4/07
next in line | 
Hits: 449
Size: 83.45 KB
Posted: 3/25/07
well the motor came out without too much fight. it is is with my son and I. | 
Hits: 385
Size: 82.75 KB
Posted: 3/25/07
here is a second view of the motor on the picker. waiting for it next home. | 
Hits: 486
Size: 96.18 KB
Posted: 3/25/07
here is the motor waiting for a new home. | 
Hits: 383
Size: 77.33 KB
Posted: 7/3/07
here is one of the last times we will see this 83 4.9 as the new owner is on the way to get it. |
Hits: 517
Size: 68.46 KB
Posted: 3/25/07
here is the emptie motor compartment. I going togive it a fast bath. | 
Hits: 408
Size: 77.88 KB
Posted: 4/21/07
well after replacing the jack on my cherry picker i was able to get the new motor in. i had to defla... | 
Hits: 426
Size: 73.18 KB
Posted: 4/21/07
here is a view from the front. all bolted in place. | 
Hits: 475
Size: 79.68 KB
Posted: 4/21/07
here is a look from the pass side. just in time for the rain. this is all that gets done today. next... | 
Hits: 369
Size: 55.47 KB
Posted: 5/15/07
i cleaned the EFI throddle cable. it is ready for the install. |
Hits: 381
Size: 61.6 KB
Posted: 5/15/07
The EFI cable is longer than the carb cable. the EFI cable is on the bottom. | 
Hits: 413
Size: 69.51 KB
Posted: 5/15/07
the cable is an easy swap. the end snaps off the pedal assemblt and the carb and there is 2 10M bolt... | 
Hits: 378
Size: 58.35 KB
Posted: 5/15/07
here is the EFI cable connection at the throddle body. | 
Hits: 380
Size: 58.21 KB
Posted: 5/15/07
it is hard to see but the dual exhaust bolted right into place. | 
Hits: 349
Size: 58.87 KB
Posted: 5/15/07
Here is the front fuel lines all clean and ready to e installed. |
Hits: 378
Size: 41.76 KB
Posted: 7/23/07
as i was connecting the the fuel line i found out there are a couple different line connection types... | 
Hits: 374
Size: 38.08 KB
Posted: 7/23/07
here you can see the issue. | 
Hits: 382
Size: 51.27 KB
Posted: 7/23/07
after alot of thought and a few searches and calls i came up with this converter adapter. | 
Hits: 372
Size: 63.01 KB
Posted: 7/23/07
here it is all connected. i was able to connect the twollines together without issue. | 
Hits: 389
Size: 49.34 KB
Posted: 7/23/07
since i was now able to connect the lines i drilled the front frame to hold the mounting bracket for... |
Hits: 398
Size: 54.21 KB
Posted: 7/23/07
here is the last view of the bracket in place. | | | | |
actual motor swap