michael collins > 1983 Ford Bronco > open folder Plugs And wires

I was not sure when this was done last so i decided to replace the plugs and wires. I went to NAPA a...
Hits: 515
Size: 87.22 KB
Posted: 4/10/07
I was not sure when this was done last so i decided to replace the plugs and wires. I went to NAPA a...		here is the drivers side when i started.
Hits: 412
Size: 60.95 KB
Posted: 4/10/07
here is the drivers side when i started.		here is the pass side as i started. it is hard to see with the air cleaner in place.
Hits: 416
Size: 60.7 KB
Posted: 4/10/07
here is the pass side as i started. it is hard to see with the air cleaner in place. 		here it is without the air cleaner in place.
Hits: 405
Size: 61.99 KB
Posted: 4/10/07
here it is without the air cleaner in place.		since the ignition system is stock i went with the factory gap setting of 0.035.
Hits: 412
Size: 50.15 KB
Posted: 4/10/07
since the ignition system is stock i went with the factory gap setting of 0.035.
i did the plugs and wires 1 at a time so i did not mix them up. here is the old wires.
Hits: 383
Size: 45.79 KB
Posted: 4/10/07
i did the plugs and wires 1 at a time so i did not mix them up. here is the old wires.		here are the old plugs they were gapped at .050 way to big for the stock ignition system. the tach d...
Hits: 373
Size: 28.34 KB
Posted: 4/10/07
here are the old plugs they were gapped at .050 way to big for the stock ignition system. the tach d...		here are the old plugs again all seemed to be burning correctly.
Hits: 404
Size: 32.59 KB
Posted: 4/10/07
here are the old plugs again all seemed to be burning correctly.		i put some of the Anit-size on the plug threads. this will keep the plugs from rusting to the head a...
Hits: 408
Size: 40.95 KB
Posted: 4/10/07
i put some of the Anit-size on the plug threads. this will keep the plugs from rusting to the head a...		i put a little Di-electric grease on the plug eands fr the cap and the plug end.
Hits: 455
Size: 37.31 KB
Posted: 4/10/07
i put a little Di-electric grease on the plug eands fr the cap and the plug end.
here are the new wires in on the pass side. most of the wire seperators broke so i need to get some ...
Hits: 407
Size: 68.97 KB
Posted: 4/10/07
here are the new wires in on the pass side. most of the wire seperators broke so i need to get some ...		here is the new drivers side wires in place.
Hits: 439
Size: 73.84 KB
Posted: 4/10/07
here is the new drivers side wires in place.		here is the cap side with the new wires in place.
Hits: 450
Size: 67.18 KB
Posted: 4/10/07
here is the cap side with the new wires in place.		we wer driving down the street and had a real bad shake and then the motor died. one issue was the c...
Hits: 488
Size: 27.09 KB
Posted: 5/16/07
we wer driving down the street and had a real bad shake and then the motor died. one issue was the c...		you can see the rotor is cooked and the bottom of the cap is in poor shape as well.
Hits: 418
Size: 30.08 KB
Posted: 5/16/07
you can see the rotor is cooked and the bottom of the cap is in poor shape as well.
you can see the center or coil nipple is burned off the cap.
Hits: 393
Size: 44.56 KB
Posted: 11/13/07
you can see the center or coil nipple is burned off the cap.		The rotor was burned real bad.
Hits: 461
Size: 33.41 KB
Posted: 12/27/07
The rotor was burned real bad.		another view of the burnt rotor
Hits: 436
Size: 28.03 KB
Posted: 12/27/07
another view of the burnt rotor		  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog