It was time to move the shed to the new house. this was a pain to setup the first time so i was not looking forward to this, but it came apart in 20 min.i have this large flat area next to the pool and the shed will work great there. its role will change some as it will house yard tools and pool stuff now. i assembled the floor it was puzzle fittings and a few screws.

this is the front view of the shed and new home.

Now the floor is down. i wanted to se how it all fits and different setups. this was the best.

this is all the other parts to the shed.i spread them out over the back lawn.

here is another view of the other parts for the shed.

it is best to start with a corner, so i started with the back corner. these have twist scews holding them in place.

a few more min pass and the back wall is completed.

Here is another view of the floor and back wall done. so far total time 10 min.

not the east side is completed. 10 min

here is a view across the pool

ok things went fast the other wall and top sill are now in place

the shed will house the pool toys and stuff so it is not all over the back yard.

This is the west side all don and the back yard between the pool and the house.

now the front doors and front rafter support and center rafter support brace are in.

and now the roof is installed.

here the shed is almost done need to install the roof clips.

this is the other side yard and some more of the pool stuff going in the shed.

the shed is about a foof away from the house so it will have some room to go around it all the way.

here is the inside roof. you can see the clips on the rear rafter and roof.

here is the front panel with the window

this is the other side window.

this is the back corner of the shed.

here is the other side of the back of the shed.

here is the floor at the front doors. this is a good shed and stood up to alot of rain and wind so far and 1 move.

this was another shot of the back yard near the diving board.