michael collins > 1983 Ford Bronco > open folder Front Airbag replacement

The front airbags were not working correctly when we got Homer. after alot of re-search i found it w...
Hits: 479
Size: 59.92 KB
Posted: 11/13/07
The front airbags were not working correctly when we got Homer. after alot of re-search i found it w...		1st thing is to remove the old bags. here is a shot of the pass side. the bottom hose was just hangi...
Hits: 591
Size: 41.06 KB
Posted: 11/13/07
1st thing is to remove the old bags. here is a shot of the pass side. the bottom hose was just hangi...		here is the line hanging off the bag.
Hits: 533
Size: 38.75 KB
Posted: 11/13/07
here is the line hanging off the bag.		ok-1st drill out the bottom of theag with a 1 1/2" hole saw without the centering bit. then push the...
Hits: 479
Size: 78.83 KB
Posted: 11/13/07
ok-1st drill out the bottom of theag with a 1 1/2" hole saw without the centering bit. then push the...		Here is the old and new bag and lines.
Hits: 483
Size: 76.54 KB
Posted: 11/13/07
Here is the old and new bag and lines.
ok- getting the new bag in was some work. i put some wheel bearing grease on the lower control arm t...
Hits: 443
Size: 50.51 KB
Posted: 11/14/07
ok- getting the new bag in was some work. i put some wheel bearing grease on the lower control arm t...		route the air lines out of the way of moving parts abd secure to the frame
Hits: 458
Size: 49.24 KB
Posted: 11/14/07
route the air lines out of the way of moving parts abd secure to the frame		i did not like the original spot so i found a new spot on the front sub frame. here is the completed...
Hits: 509
Size: 28.91 KB
Posted: 11/14/07
i did not like the original spot so i found a new spot on the front sub frame. here is the completed...		Here is the pass side when done and the bags filled to 60 PSI. Homer is 4" taller in the front now. ...
Hits: 510
Size: 38.03 KB
Posted: 11/14/07
Here is the pass side when done and the bags filled to 60 PSI. Homer is 4" taller in the front now. ...		ok drill the air valve out and repeat the process to remove the bag from the drivers side
Hits: 512
Size: 78.01 KB
Posted: 11/14/07
ok drill the air valve out and repeat the process to remove the bag from the drivers side
without the airbag and the full weight on the front spring there is not much suspension travel. i se...
Hits: 543
Size: 47.85 KB
Posted: 11/14/07
without the airbag and the full weight on the front spring there is not much suspension travel. i se...		here is the new driver side air bag and lines
Hits: 493
Size: 70.13 KB
Posted: 11/14/07
here is the new driver side air bag and lines		here is the new bag in place and ready for the air line.
Hits: 470
Size: 68.22 KB
Posted: 11/14/07
here is the new bag in place and ready for the air line.		run the line out of the way of moving parts
Hits: 498
Size: 50.1 KB
Posted: 11/14/07
run the line out of the way of moving parts		here is the new install spot on the drivers side sub frame. what a difference this has made on the r...
Hits: 478
Size: 57.85 KB
Posted: 11/14/07
here is the new install spot on the drivers side sub frame. what a difference this has made on the r...
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog