michael collins > 1983 Ford Bronco > open folder Front Airbag replacement

The front airbags were not working correctly when we got Homer. after alot of re-search i found it w...
Url
Tag
Img
Thumb
1st thing is to remove the old bags. here is a shot of the pass side. the bottom hose was just hangi...
Url
Tag
Img
Thumb
here is the line hanging off the bag.
Url
Tag
Img
Thumb
ok-1st drill out the bottom of theag with a 1 1/2" hole saw without the centering bit. then push the...
Url
Tag
Img
Thumb
Here is the old and new bag and lines.
Url
Tag
Img
Thumb
ok- getting the new bag in was some work. i put some wheel bearing grease on the lower control arm t...
Url
Tag
Img
Thumb
route the air lines out of the way of moving parts abd secure to the frame
Url
Tag
Img
Thumb
i did not like the original spot so i found a new spot on the front sub frame. here is the completed...
Url
Tag
Img
Thumb
Here is the pass side when done and the bags filled to 60 PSI. Homer is 4" taller in the front now. ...
Url
Tag
Img
Thumb
ok drill the air valve out and repeat the process to remove the bag from the drivers side
Url
Tag
Img
Thumb
without the airbag and the full weight on the front spring there is not much suspension travel. i se...
Url
Tag
Img
Thumb
here is the new driver side air bag and lines
Url
Tag
Img
Thumb
here is the new bag in place and ready for the air line.
Url
Tag
Img
Thumb
run the line out of the way of moving parts
Url
Tag
Img
Thumb
here is the new install spot on the drivers side sub frame. what a difference this has made on the r...
Url
Tag
Img
Thumb

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog