|
|
 Hits: 446 Size: 49.27 KB Posted: 12/26/07 This is a Thetford Aqua Magic Potty. it provided many good years of service. it sprung a leak while ... |  Hits: 386 Size: 36.69 KB Posted: 12/26/07 This is the printed sticker under the top lid. |  Hits: 389 Size: 37.12 KB Posted: 12/26/07 Here is the working end of the potty. There is 3 13mm nuts holding the potty to the floor. i removed... |  Hits: 387 Size: 66.72 KB Posted: 12/26/07 after disconnecting the water supply and the 2 nuts the potty comes right off. |  Hits: 396 Size: 40.08 KB Posted: 12/26/07 This is the #1 failure part. they are readily avalable at most camping worlds or RV pats houses. |
 Hits: 433 Size: 46.86 KB Posted: 12/26/07 if you have small hands you can swap the part without disassembly of the whole potty. here is the ba... |  Hits: 411 Size: 50.09 KB Posted: 12/26/07 After removing the screws the lower half comes right up. i had to disconnect 2 hoses and the base is... |  Hits: 450 Size: 34.82 KB Posted: 12/26/07 this is the supply valve. you can see 2 screws hold it in place. this is a common falure part. I bou... |  Hits: 395 Size: 32.08 KB Posted: 12/26/07 The view was just for me. i wanted to have a view of how the springs were connected so if they came ... |  Hits: 385 Size: 60.48 KB Posted: 12/26/07 this is the old valve and supply line. |
 Hits: 397 Size: 57.53 KB Posted: 12/26/07 This is the new rebuild kit. all the parts are in one bag. you can see the part number 09868 on the ... |  Hits: 405 Size: 55.83 KB Posted: 12/26/07 here is a closer shot of the part number |  Hits: 393 Size: 56.6 KB Posted: 12/26/07 Here is the old and new supply valves. |  Hits: 413 Size: 60.51 KB Posted: 12/26/07 here is the supply valve installed. if you undid the supply line and removed the nut and 2 screws yo... |  Hits: 388 Size: 26.91 KB Posted: 12/26/07 I found a 2nd leake the vacuum break. it is in the tank in this shot. bad news was 2 weeks to get on... |
 Hits: 395 Size: 66 KB Posted: 12/26/07 My bad news was my potty mount was for only one mounting and not going to work with the new potty. t... |  Hits: 373 Size: 67.73 KB Posted: 12/26/07 I took my dramil and cut the flange top ring. |  Hits: 405 Size: 64.53 KB Posted: 12/26/07 here is the new flange installed. it was called an inside slider flange and purchased from Home Depo... |  Hits: 369 Size: 40.94 KB Posted: 12/26/07 Here is the bottom of the new potty. I instaled the new bottom gasket. |  Hits: 349 Size: 40.3 KB Posted: 12/26/07 I had to extend the water supply line 6" for the new potty. i got the parts from Home Depot and Lowe... |
 Hits: 383 Size: 47.97 KB Posted: 12/26/07 Here it i all installed and ready for use. |  Hits: 398 Size: 51.48 KB Posted: 12/26/07 Here is the side front view. looks almost like the old one but no foot pedals |  Hits: 383 Size: 43.63 KB Posted: 12/26/07 Here is the working half and it is ready for work. |  Hits: 402 Size: 29.59 KB Posted: 12/26/07 Here is the stamped label under the top lid. |  Hits: 428 Size: 45.64 KB Posted: 12/26/07 Allnew pottys come with a spray wand. i just installed the mount on the wall and put the wand in the... |