1983 Ford Bronco Belt Pulleys pictures, videos, and sounds


Hits: 1783 Size: 43.49 KB Posted: 1/3/08 well i was getting a bad chipmonk sound from under the hood. each time i started Brutis iit sound li...	Hits: 1627 Size: 41.73 KB Posted: 1/3/08 here is a second view of the pulleys. they came stock as plastic but you can get metal HP replacemen...	Hits: 1023 Size: 34.8 KB Posted: 1/3/08 here are both replacements from NAPA 38001 and 38006. i had to wait one day for to get one from ano...	Hits: 2304 Size: 32.04 KB Posted: 1/3/08 here is the front of the idler pulley this was normal thread and came out without issue	Hits: 1288 Size: 34 KB Posted: 1/3/08 here is the back side- the same size and better bearing and metal.
Hits: 1601 Size: 30.71 KB Posted: 1/3/08 here is how it goes back together. the o-ring holds this all together.	Hits: 1127 Size: 51.23 KB Posted: 1/3/08 i put a small dab on the threads do if i ever need to remove it again i could.	Hits: 1321 Size: 40.63 KB Posted: 1/3/08 here is the tesioner pulley front old and new	Hits: 851 Size: 40.26 KB Posted: 1/3/08 here is the back side	Hits: 1205 Size: 39.08 KB Posted: 1/3/08 here is how the parts go together
Hits: 965 Size: 39.68 KB Posted: 1/3/08 here are the parts all cleaned up. i used a dab of antisize here too. ******this is a reverse thre...	Hits: 1169 Size: 39.93 KB Posted: 1/3/08 Here are the pulleys installed. if you were only doing these reinstall the serp belt and be on your ...