|
|
Hits: 82
Size: 113.84 KB
Posted: 9/6/19
This trailer was abused by a construction company for years, and then abandoned in poor condition. I... | 
Hits: 78
Size: 112.27 KB
Posted: 9/6/19
After I bought some property, I loaded the lift onto the trailer & hauled them away. | 
Hits: 70
Size: 131.15 KB
Posted: 9/6/19
It sat in the woods on my property for several years, with the lift on it, until I got my workshop r... | 
Hits: 67
Size: 132.82 KB
Posted: 9/6/19
Then I dragged them out and started cleaning up the lift. | 
Hits: 73
Size: 110.37 KB
Posted: 9/6/19
I removed the lift from the trailer in pieces, as I cleaned the pieces.
It got used once more befor... |
Hits: 68
Size: 82.99 KB
Posted: 9/6/19
Eventually, the trailer was empty, and I started cleaning it up. I had to grind away several welds ... | 
Hits: 67
Size: 83.95 KB
Posted: 9/6/19
The trailer itself had been used for towing or pulling other things, so its rear beam was bent back.... | 
Hits: 80
Size: 96.6 KB
Posted: 9/6/19
To straighten them, I used a 2-post lift arm, a heavy commercial ratchet strap, and a bottle jack. | 
Hits: 70
Size: 100.54 KB
Posted: 9/7/19
To straighten them, I used a 2-post lift arm, a heavy commercial ratchet strap, and a bottle jack. | 
Hits: 67
Size: 81.19 KB
Posted: 9/7/19
I gave most of the cross beams a slight arch. |
Hits: 65
Size: 90.83 KB
Posted: 9/7/19
I gave most of the cross beams a slight arch. | 
Hits: 82
Size: 132.04 KB
Posted: 9/7/19
Then I doubled the cross beams by welding in identical 2x3x1/4" angle iron. In the process, I ... | 
Hits: 90
Size: 106.21 KB
Posted: 9/7/19
After pressure-washing it all a few times, I rolled on the same [url=https://www.amazon.com/dp/B002G... | 
Hits: 102
Size: 102.07 KB
Posted: 9/7/19
After pressure-washing it all a few times, I rolled on the same [url=https://www.amazon.com/dp/B002G... | 
Hits: 91
Size: 77.9 KB
Posted: 9/7/19
After pressure-washing it all a few times, I rolled on the same [url=https://www.amazon.com/dp/B002G... |
Hits: 97
Size: 103.29 KB
Posted: 9/7/19
These LED taillights & marker lights should last - especially with the cages around them. I also put... | 
Hits: 86
Size: 72.22 KB
Posted: 9/7/19
It took 10 2x10x16s (and a 2x10x10) to deck it. I'm staggering the cuts, and ripping one of the cent... | 
Hits: 80
Size: 85.25 KB
Posted: 9/12/19
It took 10 2x10x16s (and a 2x10x10 to fill those last 2 holes) to deck it. I'm staggering the cuts, ... | 
Hits: 79
Size: 88.43 KB
Posted: 9/12/19
I was able to straighten the mangled coupler latch, and replace the missing bail. So I painted it, ... | 
Hits: 81
Size: 110.62 KB
Posted: 9/12/19
It has come a long way, but it's ready to use again.
[url=https://www.supermotors.net/registry/medi... |
20-foot Trailer